WINDOW AND DOOR SYSTEMS;

1. MB-86 Casement, ADA threshold added;

2. MB-86;

 - K(..)18620X frame added;

 - 90st. mullions and Ferroline type profiles added;

 - 8A00419X, 8A00420X corners added;

 - K434560X eaves added;

3. MB-86N;

 - K434560X eaves added;

 - glass corner added;

4. MB-59S CASEMENT, added element for "T" joints 80462130;

5. MB-59HS, added concealing strip for 3-rail variant;

6. MB-77HS, added element K518869X for E-POWER hardware;

7. MB-104 Passive;

 - 8A00425X, 8A00426X corners added;

 - K434560X eaves added;

8. MB-HARMONY OFFICE; accessories 8A00287X, 8A00609X, 8A00686X, 87252413 added;

9.MB IN PLATES, added for MB-79N, MB-86N system;

10.MB-79;

 - new facade frames added;

 - addition of PE insert and replacement of warm window sill with low Lambda spacer versions;

 - new profile K520090X added;

 - added solution - embedding a window in a timber frame wall;

 - K434560X eaves added;

11.MB-23P, system withdrawal;

12.MB-79N, MB-86, MB-86N Monticelli corners added;

FACADE SYSTEMS;

1. MB-SR50N ZS;

 - catalog update;

 - Addition of SkyRoll external facade covers;

3. MB-SR50N HI, addition of MB-79N system;

4. MB-SR50N HI+, addition of MB-79N system;

6. MB-SR50N OW, changing the maximum weight of the automatic opening window;

FIREPROOF SYSTEMS;

1. MB-118EI;

 - K415188X decorative strip added;

 - MB-118EI,Supplement FR, removal of 37 mm glazing;

2. MB-86EI, correction of maximum window dimensions, changes for drainage;

3. MB-78EI, addition of decorative strip K415188X;

4. MBSR50N EI, added opaque panels for single-chamber and single glazing;

HARDWARE;

1. WINDOW HARDWARE;

 - New section SOBINCO Panel windows added;

 - Roto VIRAGE handles changed to Roto MK2;

 - Sobinco Chrono Invision - change in selection of components;

 - Winkhaus Activ Pilot, added to MB-86 EI system with 13mm groove;

 - ROTO AL, 180mm panel window selection removed;

2. DOOR HARDWARE;

 - Security systems, changed the quantity of element 80009420 for the extension of the drive gear in RC2 door hardware;

 - Security systems, added ALUPROF - STANDARD handle with rod 8H00869X;

 - WALA, FAPIM, DR. HAHN, SIMONSWERK, ROTO added MB-70HI and increased availability of profiles;

 - Rollenband, MB-70 (HI) system added;

 - MB-60E EI and MB-86EI, GEZE TS 5000 removed;

 - additional striker plate, panic keep and magnet nut added for FUHR hardware;

 - Fapim Monaco roller hinges added;

 - Changed selection of profiles for Dr. Hahn Rollenband AT hinges;

 - WILKA, FUHR 870 correction of hardware completion;

 - WILKA, correction of the selection of electric strike in panic keep;

 - added selection of additional components for E-POWER;

 - MB-59SLIDE, Horizon handles added;

 - DrHahn, withdrawal of roller hinges (80105000,80105010,80105110,80105500,80105510,80106650,80106660);

 - ROTO OPN, withdrawal of selected VIRAGE handles;

 - ROTO reinstatement of handle with rod;

 - Securistyle Sterling, blocked;

THERMICS;

 1. added more thermal values for the 77HS system;

PRICELIST;

 - WALA WR1R, non-standard color added to selected hinges;

 - added colors for lock latch 8001058X;

 - addition of non-standard color for handle 8001289;

 - addition of painting options for cover 8015807X;

 - AP panels, promotion for accessories;

 - withdrawal of colors DECORAL, J107- Fir, B108-Beech, D207-Winchester, S208- Fir 2;

IMPROVEMENTS;

1. MB-SR50N, addition of gasket selection option for facade adapters;

2. MBSR50N EFEKT, glazing U-profile selection corrected;

3. WILKA, C function corrected;

SOFTWARE;

1. suggested fittings are highlighted in green;

2. wind map Germany has been added to the statics module;

3. added option to sort profiles descending or ascending without optimisation;

4. option to sort profiles by colour in Cut List added;

MB-CAD CHANGELOG

***** VERSION 3.88.1020, 2022-10-20

1. Improvement of "access violation" error;

***** VERSION 3.88.1014, 2022-10-14

1. MB-77HS, system upgrade (new frame, compensation profiles, E-Power hardware, Pas-24 hardware);

2. MB-Skyline, correcions;

3. MB-86N, panels for system was added;

4. Price list;

 - MB-86N, short bars for system profiles;

 - price promotion for AD panels (exclusive 77 panels at price of Classic 65);

***** VERSION 3.87.0906, 2022-09-06

1. A new system MB-SR50N A EFEKT was introduced;

2. A new system MB-79N US was introduced;

3. A new system MB-79N Casement was introduced;

4. In systems: MB-SR50N, MB-SR50N EFEKT, MB-SR50N HI, MB-SR50N HI +, MB-SR50N PL, MB-SR50N IW, MB-SR60N, MB-SR60N EFEKT, consoles for fixing poles have been added;

5. System MB-SR50N: added plugs 8013071X, 8013072X, 8013073X and screw 87252202 for K417892X rail;

6. System MB-SR50N: added end caps and screw 87252202 for the K417892X rail;

7. Window fittings;

 - MB-79N Casement and MB-79N US have been added to ROTO, MONZA, GIESSE, AUMÜLLER hardware;

 - the handle screw for MB-86 Casement and MB-Ferroline has been separated. Screw 87122324 for ROTO AL added;

 - adding ROTO FS KEMPTON fittings;

8. Door fittings;

 - introduction of WALA WU1R fittings;

 - for systems MB-79N, MB-86N, MB-104, Romb locks have been added;

 - addition of a lock for Fuhr 833 low doors and an electric strike for Wilka anti-panic locks;

9. Thermals;

 - in MB-79N US were added of Uf coefficients;

 - in MB-SR50N A EFEKT were added Uf coefficients;

 - in MB-86 were added Uf coefficients for windows with a low threshold;

 - in MB-86N were added Uf coefficients;

 - in MB-79N Casement, were added Uf coefficients;

 - in MB-79N were added Uf coefficients;

 - in MB-SR50N HI + were added Uf coefficients;

10. Price list;

 - complementing the colors of Aluprof handles;

11. Withdrawal of the MB-Expo Mobile solution;

***** VERSION 3.86.0811, 2022-08-11

1. Pricelist, pricelist update;

2. Hardwares, correction of Wala WUT hinges selection in MB-78EI;

3. Thermal calculations, suplamentation for MB-86N;

***** VERSION 3.86.0801, 2022-08-01

1. MB-86N, MB-Skyline, price discount;

2. MB-78 EI, fixed optimization of insulating inserts GFK

***** VERSION 3.85.0704, 2022-07-04

1. Visibility of profiles in cutting list by application was improved;

2. MB-79N, anti-burglary hardware in doors completed;

3. MB-79N, T-type connection of warm thresholds;

4. MB77HS Facade fixing profile length error;

5. MB-86 SI lack of thermal break in add-on profiles;

***** VERSION 3.85.0627, 2022-06-27

1. MB-86N, a new window and door system has been added;

2. MB-86 FOLD LINE HD, folding door system has been added;

3. Window hardware, change of the height range of Roto AL and Roto AL Designo, added Roto MVS reed switch;

4. Door fittings;

 - ESCO Systeq fittings were added;

 - Dr Hahn 4AT surface fittings, Rollerband AT were added;

5. MB-SKYLINE TYPE-R, catalog update;

6. MB-86 Fold Line, the way of sealing the screwed thresholds has been changed;

7. MB-86, correction of drainage and ventilation flashings, corrections of T-connections;

8. MB-86, added low threshold corner rubbers 8A00274X, 8A00275X, added workings for hidden fittings;

9. MB-78EI DPA, adding the DPA 8A00020X plate for pressure adjustment to the accessories;

10. Supplements;

 - MB-60E EI, change from EU1 supplement to ETA;

 - MB-60E EI, EU Supplement, supplements update;

 - MB-60E EI, MB-78EI, MB-78EI DPA, removal of PL Supplements;

11. Price list - price reduction for AD panels;

12. Improvements into the program;

 - a macro has been added to the VAT field;

 - the display of the window with hardware in low view quality has been improved;

 - added option to scale drawings on printouts (Program options - Other);

***** VERSION 3.84.0504, 2022-05-04

1. Corrected GM number for clamping strips;

2. After each program update, please remember to upload the updated item price list, appropriate for your region;

***** VERSION 3.84.0429, 2022-04-29

0. Option of ending facades has been corrected;

1. MB-45;

 - EU supplement, a new supplement for smoke protection solutions;

 - gasket corners 121668 and 121669, the connector 80122469 and the lock 800010119 have been added;

 - change of strike plates, added K430006X door frame;

 - added 80004327, profile processing changed;

 - catalog update, added profiles K418005X, K418023X and K411306X, 80135527, 80435024, 87222403 and 87242405;

2. MB-79N;

 - correction of the text of the technical description, change of thermal breaks and insulation insert in selected profiles;

 - adding renovation frames, correcting the geometry of the sill profile;

 - removing of the plug 8045503X;

 - new sections have been added, including K520211X;

 - 8A00419X, 8A00420X corners have been added;

 - new threshold corners 8A00309X-310X have been added, new screws have been added;

 - low threshold corner rubbers 8A00687X, 8A00688X have been added, side with hidden hinge treatment for low threshold has been added;

3. MB-SR50N;

 - the end of the facade without 2mm metal sheet has been added, Silirub EPDM glue has been added;

 - EI EFEKT, corrected swelling tape code, new page for the glazing table;

 - HI (HI +), gasket 120593 has been added, new glazing of the façade ending;

 - PL, sealing compound 1461502 was added;

4. MB-SR60N, new connectors have been added;

5. MB-59HS, MB-59HSB, new dimensional relationships, machining added;

6. MB in plates, adding the K413910X angle;

7. Window fittings;

 - added ROTO AL DESIGNO low threshold hardware and the UR variant to the ROTO AL low threshold, the link rods have been changed;

 - adding ROTO and MACO hinges for the PVC groove for OL90 and TAKT150 fittings;

 - MB-79N has been added to ROTO Additional Elements, 3D detail view for MB-79N;

 - the link rods numbers have been updated, the redundant catch in ROTO AL has been removed. Low threshold, pusher lengths updated;

8. Door fittings;

 - modification of WALA WR1R fittings, added WALA WR2R fittings;

 - change of the scope of application for the locks from 2400 to 2500 for FUHR 833p and 834p anti-panic locks;

 - catch plate changed from 80004653 to 80004912;

 - update of sections in the selection tables;

 - added minimum dimensions for hinges in the MB-79N system;

 - updating the list of profiles used for WX WALA hinges, adding MB-FERROLINE to WALA WR;

9. Anti-burglar systems;

 - added MB-86EI (RC2) door and specified method of fixing the structure to various types of buildings;

 - change of the hinge side in Roto AL160 hardware;

 - RC2, RC3 door hardware correction;

 - supplementation of 13mm PVC leaves in MB-86EI, correction of the use of fittings;

 - the MB-79N system has been added;

10. MB-GLASS BARRIER, K430987X profile change;

11. MB-78EI DPA, adding pages with T-connection variant;

12. MB-45 Office, correction of the hydraulic hinge;

13. MB-Slimline, added profiles K519230X (K519330X), K519240X (K519340X);

14. MB-86, MB-104 Passive, an alternative to the corner 80124550 and the pin 8A00635X have been added;

15. MB-70, correction of IX values ??for profiles K518121X, K518122X, K518129X;

16. Price list;

 - release of the handles without rosettes K1810550X-554X;

 - added an alternative length for the K430482X crosspiece;

 - adding color 9005 for the 1810504X handle;

 - MB-SR60N (EFEKT), profile available on request comment excluded, for selected profiles;

 - withdrawal of EuroLine handles, grips and rosettes;

 - correction of standard and alternative profile lengths from the MB-77HS system;

 - the old WALA WR1R hinges have been withdrawn;

 - modification of the NOVET ventilation grilles codification;

 - the ROMB ALU and ROMB ALU EURO fittings exclusion;

 - addition of an alternative length of 5200 mm for 009138 and 009139;

 - removal of selected profile colors from the basic offer (RAL 2000, 2010, 2011, 3014);

***** VERSION 3.83.0329, 2022-03-29

0. After each program update, please remember to upload the updated item price list, appropriate for your region;

1. Correction of add-on profiles in thermal calculations;

***** VERSION 3.83.0328, 2022-03-28

0. After each program update, please remember to upload the updated item price list, appropriate for your region;

1. Update of the price lists, valid from 2022-03-28;

2. Price list, withdrawal of ROMB ALU and ROMB ALU EURO hardware;

3. Window fittings;

  - Roto AL Designo hardware has been added to the solution with a low threshold;

  - adding ROTO and MACO hinges under the PVC groove for OL90 and TAKT150 fittings;

4. Amendments;

  - MB79N selection of the Wilka anti-panic lock Function E;

  - Harmony Office, frame cutting angle;

  - MB-SR50N HI+ cross-sections of transom cover profile with the gutter;

  - MB-SR50N EFEKT, glass fixing elements;

  - Completion of floating mullion Winkhaus aluPilot RC2 fittings;

***** VERSION 3.82.0210, 2022-02-10

0. After each program update, please remember to upload the updated item price list, appropriate for your region;

1. MB-SR50N EFEKT, new accessories, glazing tables and sections have been added;

2. MB-SR60N EFEKT, added consoles;

3. MB-80 OFFICE, new walls with MB-45 OFFICE doors have been added, angular connections added;

4. MB-45 OFFICE, update of inter-pane tapes, additional fittings;

5. MB-SR60N;

 - added consoles;

 - change of the sleeve code from 80380036 to 80379906;

 - changing the fixing screw from 87252721 to 7405L506;

6.MB-Slider Window, catalog update, K430972X three-rail door frame, missing sections for K430972X door frame have been added;

7. Window fittings, extending usage of Securistyle hinges;

8. Door fittings;

 - new anti-panic Wilka hardware has been added;

 - introduction of a new Assa Abloy bolt, Wala WUT hidden hinge in the MB-78EI system and corrections in Fuhr fittings;

 - DrHahn roller hinges and curved hinges have been added in the MB-79N system;

 - update of the spacer drawing for Loira + fittings, change of profiles codes in WALA;

 - added minimum dimensions for hinges in the MB-79N system;

 - update of profiles used for WX WALA hinges, adding MB-FERROLINE to WALA WR;

9. MB-Skyline;

 - update of drainage and ventilation solutions;

 - change of appearance, processing and fastening of elements 80457173, 80457174-75, screw 87222407 added;

 - adding 8045764X, 8045765X, 87252407;

10. MB-Skyline TYPE-R, added corner connectors, corner connections, changed silicone codes, changed the sliding gasket in typical structures;

11. MB-86;

 - MB-86, adding renovation frames;

 - MB-86, change of dimensioning, hatching, siliconizing, adding MS Polymer;

12. MB-45, new electric strikes have been added, new sections with the 80004327 strip;

13. MB-104 Passive, added K (..) 19100X, Style and Prestige strips  removed;

14. Complementary items to the IP;

 - K440502X has been added, the montage method of 80490017-20 has been changed;

 - the K440252X section has been added, the clearances with which the strips should be cut from the inside have been corrected;

15. CE data;

 - MB-104, MB-45, MB-59HS, MB-59 Slide, MB-70HI, MB-70US, US HI, MB-86, MB-86 Foldline, MB-Ferroline, MB-SR50N OW;

16. New Termoprofi inter-pane frames have been added;

17. Thermals, specification of the Uf values ​​for the MB-79N door;

18. Price list, a new discount group has been added: MBSKYLINE;

19. Calculations related to the length of muntins were rebuilt;

***** VERSION 3.81.0121, 2022-01-21

1. Introduced corrections to the current version;

 - MB-86, correction calculation of length for frame profiles, according to the application;

***** VERSION 3.81.1210, 2021-12-10

0. After each program update, please remember to upload the updated item price list, appropriate for your region;

1. MB-SR50N (HI, HI +, EFEKT), MB-SR60N, reduction of transoms deflection was introduced;

2. MB-SR50N HI +, new profiles have been added (including a flat strip), washers, screws, brackets, glazing tables, drainage and basic dimensional relationships with a flat strip;

3. MB-SR50N (HI, HI +, EFEKT), changes in E and I type connections;

4. MB-SR50N EFEKT correction of washers and glazing table supports;

5. MB-SR50N PL, a fixed connection 5.5kN and a sliding connection 4.2kN have been added, correction of the codes for glass pads;

6. MB-SR50N IW, Hs change in schemes, corrections in Savio - Ribanta Incanto fittings;

7. MB-SR50N EFEKT, sealing compound 1461502 was added;

8. MB-70HI, MB-86, added panel window, panel window fittings;

9. MB-86, MB-104 Passive, added glazing from outside in the all-glass corner;

10. MB-SKYLINE TYPE-R, corner connectors have been added, silicone codes have been changed, the sliding gasket has been changed in typical constructions;

11. MB-FERROLINE, added crosspieces, K519560X threshold, new T-type connection with new crosspieces;

12. Complementary elements for OD systems, adding an alternative profile for fixing renovation profiles to windows;

13. MB-78EI AT supplement, catalog update, supplementing tables with profiles, gaskets and accessories;

14. MB-70, MB-86, MB-86 Casement, MB-86B, MB-86US, MB-104 Passive, change from 87252405 screw to 87252407, added a note on the connection to the facade;

15. MB-86, adding a new threshold K519560X mounting;

16. MB-86, ADA low threshold added, glazing table changes;

17. MB-86EI, added 13 mm PVC wings, new Ferroline profiles and additional window solutions were added;

18. MB-INSTALLATION SOLUTION, adding new window beams 127202-127205 and the MB-79N system;

19. MB-INSTALLATION SOLUTION, change of tape codes 31600040 to 8G00119X, 31600070 to 8G00120X;

20. MB-77HS, 19101022 quantification changed;

21. MB-SLIDER WINDOW, change of cross-section designation, change of drawings, change of pages titles;

22. MB-60E EI gasket 120553 and gasket corners 121668 and 121669 have been added;

23. MB-80 OFFICE;

 - a new profile has been added, a 2 mm inter-pane seal has been added;

 - change of machining for the MB-45 OFFICE door hinged;

 - new tapes, workings for DORMA fittings;

24. Fittings;

 - MB-SR50N IW, replacement of the Savio - Ribanta Incanto with the Savio - Ribanta Incanto 5;

 - windows, panel window fittings were added;

 - windows, Roto AL Designo panel window hardware has been added peripherally locked, Sobinco Invision Go hidden clamp has been changed, ESCO opening limiter has been added)

 - windows, designation for Ls = 220 mm has been added for Roto Panel window;

 - windows, added Giesse closing side for panel window;

 - windows, correction of Giesse fittings of a panel window;

 - windows, added warning note abou the usage of surface hardware for ESCO. Opening limiter;

 - windows, correction of the Lp55 balance selection in the Roto AL160 UR fitting;

 - windows, restored Fapim Galicube pages with lower load capacities;

 - doors, improvement of Fuhr descriptions, replacement of 8001003X with 8001060X, 8001004X with 8001061X;

 - doors, the possibility of using WALA roller hinges has been added for doors in MB-Ferroline;

 - doors, changing pages with WALA handles, increasing the range of WALA WR, WR1R hinges, additional WALA elements;

 - doors, the scope of application for double-leaf doors for Fapim Oltre has been specified;

 - doors, adding new ECO SCHULTE handles;

 - doors, new anti-panic Wilka fittings were added;

 - doors, added GEZE anti-panic locks, additional elements, cable gland, bolts, anti-panic locks;

 - doors, added GEZE door closers: 8000972X, 8H00503X, 8H00504X;

 - door, replacement of the fixing plate 80107981 with 80107980 in ROTO Solid C concealed hinge;

 - doors, improvement of the table with the selection for locks with a spindle 8x8 after adding new Eco Schulte handles;

 - doors, improvement of the number of handles for the anti-panic function B for ECO SCHULTE;

25. Price list changes;

 - withdrawal of FUHR elements;

 - removal of selected colors for GU handrails;

 - added color 9005 to Virage handles;

 - restoration of the TS K20 19201660 hitch;

 - new color versions of SOBINCO handles have been added;

 - removal of 8000500X GIESSE - Outside handle with recess;

 - added color 9005 for selected WINKHAUS handles;

 - the possibility of painting WR1R hinges has been added;

 - disabling the AG10 panel availability for Basic 44, Basic 52;

26. Thermal calculations;

 - MB-SR50N EI list of Uf coefficients;

 - T3214 MB-77HS (HI), list of Uf coefficients;

 - MB-FERROLINE, list of Uf coefficients;

***** VERSION 3.81.1210, 2021-12-10

0. After each program update, please remember to upload the updated item price list, appropriate for your region;

1. MB-SR50N (HI, HI +, EFEKT), MB-SR60N, reduction of transoms deflection was introduced;

2. MB-SR50N HI +, new profiles have been added (including a flat strip), washers, screws, brackets, glazing tables, drainage and basic dimensional relationships with a flat strip;

3. MB-SR50N (HI, HI +, EFEKT), changes in E and I type connections;

4. MB-SR50N EFEKT correction of washers and glazing table supports;

5. MB-SR50N PL, a fixed connection 5.5kN and a sliding connection 4.2kN have been added, correction of the codes for glass pads;

6. MB-SR50N IW, Hs change in schemes, corrections in Savio - Ribanta Incanto fittings;

7. MB-SR50N EFEKT, sealing compound 1461502 was added;

8. MB-70HI, MB-86, added panel window, panel window fittings;

9. MB-86, MB-104 Passive, added glazing from outside in the all-glass corner;

10. MB-SKYLINE TYPE-R, corner connectors have been added, silicone codes have been changed, the sliding gasket has been changed in typical constructions;

11. MB-FERROLINE, added crosspieces, K519560X threshold, new T-type connection with new crosspieces;

12. Complementary elements for OD systems, adding an alternative profile for fixing renovation profiles to windows;

13. MB-78EI AT supplement, catalog update, supplementing tables with profiles, gaskets and accessories;

14. MB-70, MB-86, MB-86 Casement, MB-86B, MB-86US, MB-104 Passive, change from 87252405 screw to 87252407, added a note on the connection to the facade;

15. MB-86, adding a new threshold K519560X mounting;

16. MB-86, ADA low threshold added, glazing table changes;

17. MB-86EI, added 13 mm PVC wings, new Ferroline profiles and additional window solutions were added;

18. MB-INSTALLATION SOLUTION, adding new window beams 127202-127205 and the MB-79N system;

19. MB-INSTALLATION SOLUTION, change of tape codes 31600040 to 8G00119X, 31600070 to 8G00120X;

20. MB-77HS, 19101022 quantification changed;

21. MB-SLIDER WINDOW, change of cross-section designation, change of drawings, change of pages titles;

22. MB-60E EI gasket 120553 and gasket corners 121668 and 121669 have been added;

23. MB-80 OFFICE;

 - a new profile has been added, a 2 mm inter-pane seal has been added;

 - change of machining for the MB-45 OFFICE door hinged;

 - new tapes, workings for DORMA fittings;

24. Fittings;

 - MB-SR50N IW, replacement of the Savio - Ribanta Incanto with the Savio - Ribanta Incanto 5;

 - windows, panel window fittings were added;

 - windows, Roto AL Designo panel window hardware has been added peripherally locked, Sobinco Invision Go hidden clamp has been changed, ESCO opening limiter has been added)

 - windows, designation for Ls = 220 mm has been added for Roto Panel window;

 - windows, added Giesse closing side for panel window;

 - windows, correction of Giesse fittings of a panel window;

 - windows, added warning note abou the usage of surface hardware for ESCO. Opening limiter;

 - windows, correction of the Lp55 balance selection in the Roto AL160 UR fitting;

 - windows, restored Fapim Galicube pages with lower load capacities;

 - doors, improvement of Fuhr descriptions, replacement of 8001003X with 8001060X, 8001004X with 8001061X;

 - doors, the possibility of using WALA roller hinges has been added for doors in MB-Ferroline;

 - doors, changing pages with WALA handles, increasing the range of WALA WR, WR1R hinges, additional WALA elements;

 - doors, the scope of application for double-leaf doors for Fapim Oltre has been specified;

 - doors, adding new ECO SCHULTE handles;

 - doors, new anti-panic Wilka fittings were added;

 - doors, added GEZE anti-panic locks, additional elements, cable gland, bolts, anti-panic locks;

 - doors, added GEZE door closers: 8000972X, 8H00503X, 8H00504X;

 - door, replacement of the fixing plate 80107981 with 80107980 in ROTO Solid C concealed hinge;

 - doors, improvement of the table with the selection for locks with a spindle 8x8 after adding new Eco Schulte handles;

 - doors, improvement of the number of handles for the anti-panic function B for ECO SCHULTE;

25. Price list changes;

 - withdrawal of FUHR elements;

 - removal of selected colors for GU handrails;

 - added color 9005 to Virage handles;

 - restoration of the TS K20 19201660 hitch;

 - new color versions of SOBINCO handles have been added;

 - removal of 8000500X GIESSE - Outside handle with recess;

 - added color 9005 for selected WINKHAUS handles;

 - the possibility of painting WR1R hinges has been added;

 - disabling the AG10 panel availability for Basic 44, Basic 52;

26. Thermal calculations;

 - MB-SR50N EI list of Uf coefficients;

 - T3214 MB-77HS (HI), list of Uf coefficients;

 - MB-FERROLINE, list of Uf coefficients;

***** VERSION 3.80.1115, 2021-11-15

1. Price list 2022-01 upgrade;

2. Restoration of Roto Designo hardware;

3. Export to sawing machines, fixes;

***** VERSION 3.79.1026, 2021-10-26

1. MB-HARMONY OFFICE, new catalogue;

2. MB-59 Slide Galandage, updated catalogue;

3. MB-GLASS BARRIER, added reinforced variant and protective strip for 8.8 mm glazing, corrected number of elements in a construction;

4. MB-SKYLINE, modified glazing options, modified glazing instruction description, minor changes;

5. MB-Ferroline, added 90-degree mullions and installation profile for GK;

6. MB-Ferroline, added insulating inserts for 90-degree posts, cosmetic changes;

7. MB-70, continued development of the panic door threshold, modified size of working of the floating mullion;

8. MB-118EI, added 48mm glazing, added section through reinforced mullion;

9. MB-86, added K(...)30030X profile, added section through the window in MB-SR50N EFEKT;

10. MB-60, MB-70, 120553 added seal corners;

11. MB-60, MB-70, MB-86, MB-104 Passive, added concealed drainage system 127238;

12. MB-70HI, MB-86, MB-104 Passive, continued development of the panic door threshold;

13. Window hardware;

 - ROTO, Siegenia hardware, added MB-79N system, corrected minimum window sizes;

 - added new low-level threshold solution for the K519560X profile;

 - changed diagrams by kg/m2 dependence, for ROTO AL 130, AL160, AL Designo hardware;

 - added variant for ROTO low-level threshold hardware;

 - corrected picking for ROMB and MACO hardware;

 - EGO, MONZA system added to FAPIM, FAPIM Galicube range extended to 150 kg;

 - changed Hs on ROTO AL diagram from 2500 to 2250, changed 18106192 to 80009035 in ROMB Alu;

 - HARDWARE 1 (ROTO AL - added variant of T&T hardware in low-level threshold for MB-Ferroline, changed hardware selection scheme);

14. Door hardware;

 - added diagram for double leaf doors in DORMA, added 87222508 screw in GEZE and changed working for door closer;

 - updated WALA WR1R handles, changed FUHR sash height, added new Eco Schulte handle, improved Dr. Hahn hinges;

 - added mounting elements for additional Fuhr hardware components;

 - corrected WALA handle-knob code 8000923X, added note ‘do not use with concealed hinges’;

 - added note with Dorma concealed closers about not using them with concealed hinges;

15. Burglar-resistant systems;

 - added variant of the FUHR burglar-resistant lock 855GL type 3 - 8H00162X;

 - added MB-60 and 70 Industrial systems, updated lists of profiles;

 - changed height of handles in ROTO AL and ROTO AL DESIGNO, several sets divided into single pieces;

 - added Winkhaus AluPilot RC2 hardware;

 - changed 80009418 striker plate to 8H00063X;

 - changed 18108037 to 18108038 for Winkhaus aluPilot RC2;

16. - MB-86EI, Uf coefficients for EI1 and EI2 doors;

17. STATICS, moments of inertia of reinforced profiles;

18. Price list;

 - systematised colours of accessories and hardware bought and painted 7016 and 9005 in the software, removed colours 7016 and 9005 from the list of non-standard colours;

 - retired 8H00116X elbow button;

 - retired GU mandrel handles;

 - retired GU 19102060 lock;

 - Giese handle in the MB-SLIDE system;

 - retired K440112X door frame profile from the MB-HARMONY system;

 - changed GU 19101034 brake name;

 - 1924221X, added R7016 colour;

 - added non-standard colour for the 8H00270X hinge;

 - added colours for the 8015322X roller mount;

 - short lengths of the threshold profiles in MB-79N;

 - ROTO AL DESIGNO hardware stop;

 - systematised DB703 colour in offerings and programs;

 - added list of profiles in the MBHARMONY discount group;

 - added profiles to the MB86 discount group;

 - added 9005 colour for selected ROTO elements;

 - removed non-standard colour for 1910084X handle;

 - removed K431162X profile from the MB-SKYLINE system;

19. Errors;

 - corrected Access Violation error when changing infill order;

 - added hardware name to macros ($OKUCIA_NAZWY$);

 - improved view of handles on sections;

 - Wala WR1R, corrected transition light;

 - MB-SR50N, added seals on K431524X reinforced mullion;

 - MB-45 Office, corrected transition light;

 - MB-Skyline, corrected 009267 profile length;

 - MB-SR50N EN improved selection of elements at the wall;

 - MB-Slimline, corrected quantities of 127016 central seal and 127021 corner seal;

 - MB-77HS, improved calculations of 120855 insert;

 - MB-79N, verified threshold lengths and mounting elements;

 - MB-86, MB-86EI, verified 1mm leaf reduction;

***** VERSION 3.78.0705, 2021-07-05

1. Updated export price lists 2021-08;

2. MB-86EI, added EI2 30 doors;

3. MB-86, changed threshold attachment;

4. Fittings;

 - added SOBINCO ChronoPlus InvisionPRO fittings;

 - added MB-86EI EI2 30 door;

5. Panels, added new AD28-AD46 panels, added AG panel series;

6. MB-104 Passive, added Uf coefficients;

7. Price list;

 - restricted available colours for the 8030126X door pull;

 - withdrawn Siegenia hardware components;

 - shorter lengths for leaves with low-level threshold in the MB-79N and MB-86 systems;

 - added DB703 colour to MAT colours;

 - added 7016 colour for GEZE door closers;

 - withdrawn 87122423 screw;

 - shorter MB-79N profiles;

 - colours 8030140X, 8030141X, 8030125X and 8030126X restricted to INOX;

 - GU handles, withdrawn raw and non-standard colour, added 9005;

 - MB77HS withdrawn GU handles;

***** VERSION 3.77.0601, 2021-06-01

1. Price list, updated export price lists 2021-06-01;

2. MB-SR50N, MB-SR50N EFEKT, MB-SR50N HI, MB-SR50N HI+, MB-SR50N IW, MB-SR50N PL, new façade consoles;

3. MB-78EI Supplement FR, updated supplement, added new accessories, profiles, cross sections;

4. MB-79N, added Uf coefficients for doors;

5. MB-86, insulator added to the façade adapter;

6. Slider Windows, improved hardware selection;

7. Door hardware, added WR1R hinges;

8. MB-79N;

 - new additions to the door division with drop-down threshold;

 - corrected length of the sash crosspiece;

9. MB-SKYLINE TYPE R;

 - updated catalogue;

 - adjusted connectors 80022500-80022503;

 - new additions 80153220 in diagram K;

10. MB-77HS, corrections;

 - cover cap;

 - fixed glazing;

 - hardware selection;

 - selection of additional rollers;

 - rc2-rated pulls;

11. Price list, colour DB703 in structural finish moved to the STD_STR price group;

***** VERSION 3.76.0.0512, 2021-05-12

1. Software, correction of calculation price of free glass;

2. MB-77HS;

 - correction of concealing strip 009258 and 120926 insulator;

 - correction of K(..)8822X profile in fix glazing;

 - frame connector for fix glazing;

 - correction of hardwares;

3. MBSKYLINE TYPE R;

 - correction of 121342 insulator calculations;

 - warning texts for hardwares;

***** VERSION 3.76.0.0504, 2021-05-04

1. MB-Skyline TYPE-R, new system;

2. MB-79N, door;

3. Hardware;

 - replaced codes for FUHR hardware, added new locks 835 & 836;

 - added two variants of FUHR 855GL Type 3 locks - 8H00162X & 8H00163X;

 - range complete with TS Profil door closer by DORMAKABA;

 - corrected mounting plate for ROTO Solid C hinges for MB-86;

 - MB-45 OFFICE, added new DORMA hardware;

 - concealed availability of Maco Multi Matic hardware;

4. MB-118EI, added plate 80322165, changed glazing option;

5. Supplements;

 - MB-118EI Supplement EN, new supplement;

 - MB-118EI Supplement EU-1, new supplement;

 - MB-118EI Supplement FR, New Supplement;

6. Thermal calculations;

 - MB-79N, Uf coefficients for doors;

 - MB-SR50N EFEKT, Uf coefficients;

 - MB-86EI, Uf coefficients for EI1 and EI2 doors;

7. Price list;

 - added items in the list of profiles in the MB79N discount group;

 - added alternative lengths of selected MB-77HS system profiles;

 - added ALUPROF LINE handles in 7016 colour;

 - improved length of the K430412X;

 - hardware, - withdrawn G-U elements;

 - MB-SG50 removed Roto hardware;

 - changed codes for HS Master drive 1910108X and 1910109X;

 - removed Caldwell closer page;

***** VERSION 3.75.0.0219, 2021-02-19

1. MB-SKYLINE;

 - added new profiles and accessories, added new solution with ESCO automation;

 - changed elements in the glazing table;

 - added constructional diagrams and cross-section with automation, changed minimum sash/leaf width for automation;

 - changed quantities for drive enclosure selection and changed cut list for K440101X, number 8A00051X changed to 8H00051X;

2. MB-79N, corrections;

 - code K433295X changed to K432295X;

 - added profiles K412677X, K432267X, K432298X and new thermal inserts;

 - washer 80490067 changed to 85730131;

 - corrected position of the stop seal, removed low-level threshold from E variant;

3. MB-77HS, corrected hardware picking, changed dimensional relations for corner connections, and silicone changed to MB-Polymer;

4. MB-SR50N ZS, new catalogue;

5. Supplements MB-78EI;

 - EU2, added new supplement;

 - EU4, added new supplement;

6. Thermal conditions;

 - MB-86US, improved Uf coefficients;

 - MB-79N, added Uf coefficients variant E, ST, SI;

7. Price list;

 - non-standard, any colour - characters limited to four;

 - added new discount groups: MB104PASSIVE, MBSLIMLINE, MBFERROLINE, please complete the program with the appropriate discount;

8. Withdrawn system;

 - MB-Accordion door - withdrawn visibility of the system to be disabled;

9. Patches to the software;

 - corrected espagnolette Fuhr 833 type 4 MB104;

 - corrected numbering of the weeks of the year;

 - fixed SQLite3 Error 1 when generating LC;

 - MB-70 DPA added door crosspieces;

 - MB-86 FOLD LINE, corrected striker plate for Fuhr 855;

***** VERSION 3.74.0.0112, 2021-01-12

1. MB-79N, introduced new system - window solutions;

2. MB-SR60N EFEKT, introduced new façade system;

3. MB-SR60N, added moments of inertia of mullions with reinforcements;

4. MB-SR50N EI EFEKT, changed spacers and insulator;

5. MB-70, MB-70B, MB-70HI, MB-70US, MB-70US HI, MB-86, MB-86US, MB-104 Passive, corrected MB-SR50N façade section views;

6. MB-77HS (catalog update);

7. Hardwares;

 - windows, added MB-79N system, corrected minimum window sizes;

 - windows, changed selection patterns of Sterling scissor hinges;

 - windows, corrected section list and pusher selection for Aumuller hardware;

 - windows, new Aumuller locking 1924161X, 1924162X, 1924163X;

 - windows, 19202430 replaced with 19201210 and 19202440 with 19201220;

 - doors, changed bolt guide for MB-78EI doors with automatic bolting, added solution with K518140X threshold;

 - door, corrected G-U Automatic lock A4;

 - doors, changed description, withdrew plates 19102240, 19102241, 19102242, 19102243, added plates 19102237, 19102238, changed tables with bars, screws changed to M5;

 - doors, new G-U striker strips;

 - doors, added panic levers 8001060X, 8001061X;

 - doors, changed locks G-U - AUTOMATIC A4;

 - doors, changed mounting plate from 80322077 to 8A00006X (DORMA), added hardware FUHR 966, added crosspiece in ROTO Solid C;

 - doors, changed striker plates KFV 80004650, 80004651 to 80004910, 80004911;

 - doors, removed 8001269X from double doors in Fapim OLTRE hardware;

 - Security systems, changed codes in Roto Designo hardware, changed spacers in MB-104 Passive;

 - Security systems, changed designation of FUHR 833 and FUHR 855GL type 3 hardware from SKG to RC2;

 - Security systems, changed hinge side in Roto AL160 hardware;

 - Security systems, corrected ROTO hardware for RC2 and RC3;

 -Security systems, changed striker plates for FUHR RC2;

8. Price list - added new discount groups: MB79N, MB86, MB86FOLDLINE, MB77HS, MB59HS/Slide;

9. Minor corrections;

 - MB-104, added possibility of connecting a 2-sash window to the façade;

 - MB-SR50N A, automatic transom shortening for 300kg+ infills;

 - MB-SR60N, added virtual hardware “no hardware”;

 - MB-Skyline, corrected selection of plugs 8045754, 8045755;

 - MB-SR50N, improved selection of window spacing elements in façade;

***** VERSION 3.73.0.1112, 2020-11-12

1. MB-86EI, updated catalogue, added door;

2. MB-78 EI Supplement EU3 EI1, new catalogue;

3. Added new AP panel door patterns, updated price list;

4. Window fittings;

 - added Roto NT Alu Designo fittings;

 - modified selection of ROTO fittings for low-level threshold;

 - corrected selection of pushers for Roto AL 130 low-level threshold;

 - added handles, drawings now include Hw and Lw + working;

 - added screw 7406A306, changed number of strikes;

5. Door fittings;

 - added DormaKaba door closers;

 - added inward opening door for Wilka automatic locking, corrected picking for Wala and Eco Schulte D-116 handles;

 - added extension of the locking device;

 - FUHR 833p and 834p, changed application range for locks, from 2400 to 2500 for panic locks;

6. Burglar-resistant systems;

 - added ALU 5200 RC2 and Siegenia ALU axxent PLUS RC2 fittings;

 - corrected picking of Siegenia ALU5200 and Siegenia accent PLUS fittings;

7. Changes to the price list;

 - retired Caldwell and Roto hardware components;

 - added handle 1810781X in anode and white;

 - added a non-standard colour for hinge 1820070X;

 - bi-colour with EC--0 for K519822X and K519326X;

 - 6800 length set for MB-77HS profiles;

 - added colour 7016 for Fapim hinge;

 - added colour 9005 and 9007 for Wala hinge;

 - added additional cap colours to the MB-SR50N;

8. Corrected calculation;

 - MB-77HS, corrected connector of the narrow mullion, removed insulator;

 - Roto AL 130 fittings low-level threshold, corrected picking;

***** VERSION 3.72.0.0805, 2020-08-05

1. MB-77HS, updated catalogue, narrow mullion, new hardwares. Major catalogue changes;

2. MB-Skyline, updated catalogue, added new profiles and accessories;

3. Hardwares;

 - doors, added concealed hinge ROTO Solid C;

 - windows, modified ROTO hardware selection for low-level threshold;

 - windows, added concealed chain drive Master WiCloud;

4. Various corrections;

 - MB-Foldline, verified leaf width, typical constructions;

 - MB-Glass barrier, corrected material in the U scheme;

 - MB-118 EI, corrected length of the CI insert for the glazing beads;

 - MB-Ferroline, corrected selection of Fuhr lock;

***** VERSION 3.71.0.0622, 2020-06-22

1. MB-SR60N, new façade system;

2. MB-45, updated catalogue, retired Sobinco locks;

3. MB-59 Slide Galandage;

 - hardware, added inactive leaf handles, corrected picking & working;

 - updated indexes, hardware- changed handle code;

4. MB-60, added corner to the direction-changing strip;

5. MB-60E EI;

 - added air grilles, changed seal corner;

 - supplement PL, new supplement to the catalogue;

 - supplement EU ETA, new supplement to the catalogue;

 - added information on fabricating single-smoke-resistant door using 3-point locks;

 - changed the swelling tape-fastening screw;

6. MB-70;

 - added corner to the direction-changing strip;

 - added reinforced crosspiece;

 - added K518421X non-rabbeted profile;

 - HI, corrected K618133X frame insert code;

 - HI, added reinforced crosspiece;

 - added K618421X non-rabbeted profile;

7. MB-70US, added reinforced crosspiece;

8. MB-78EI;

 - supplement EU et AT, added handles and panic bars;

 - supplement BE, added GEZE BOXER 2-4 ISM door closer;

 - supplement PL, EU, BE, AT, added new pages;

 - added insulating inserts and adhesive for the layered element, added installation of the layered element in EI15-60;

 - changed the swelling tape-fastening screw;

 - added working of door trim strip, added fireproof silicone sealant;

 - added 120553 gasket and 121668 & 121669 seal corners, working of glazing strips;

9. MB-86;

 - added new frames: K518638X, K718638X, K818638X and leaves: K718724X, K818724X;

 - added leaf with low-level rabbet, reinforced crosspieces and K519560X threshold;

 - added K(...)18723X leaf;

 - added connections of K(…)18691X and K(…)18692X reinforced crosspieces;

 - added corner to the direction-changing strip;

 - added K(…)18668 non-rabbeted profile;

 - added working for low-level threshold;

 - used exterior-glazing profile for K518609X profile;

10. MB-86 Casement;

 - added K518766X and K518767X leaves;

 - added low-level threshold K518930X;

11. MB-86 FOLD LINE, added hardware - FUHR 855GL U24x6 D40 lock, corrected end gasket corner;

12. MB-86EI, added comments on the machining of drainage & ventilation holes;

13. MB-86US;

 - added new frame;

 - added vulcanised frame, added connection of frame corners;

14. MB-104 Passive;

 - extended glazing for openable window with Standard strips, corrected drainage systems;

 - added reinforced crosspieces;

 - added K(…)19068X non-rabbeted profile;

 - added crosspiece glazing;

 - used exterior-glazing profile for K519008X profile;

15. Hardwares;

 - windows, added Winkhaus aluPilot, corrected Maco Multi-Matic;

 - corrected profile list for Aumuller hardware;

 - windows, added minimum sash dimensions for WINKHAUS AluPilot hardware;

 - windows, changed restrictor code for Winkhaus aluPilot Topstar 130kg D2 GZ;

 - windows, doors, added inserts for patio doors for Sobinco handle, MB-86 Casement;

 - windows, doors, retired Giesse hardware from MB-Ferroline, changed handle number, retired CANDEZ handle, new left and right Sobinco knob codes;

 - door, Wala- changed door pull codes, FUHR - added 881 lock, type 11, 834p function B, extended espagnolette, electrical equipment, changed picking;

 - door, added 80009934 threshold striker, screws for rod for Wolf and FUHR panic hardware;

 - door, changed installation elements of Wala WX hinges for MB-104 Passive;

 - doors, added MB-86 for Fapim EGO MONZA, FUHR 855GL type 3, FUHR 833 type 4 and 80010067 bolt, corrected picking FUHR 833 type 4 and 80010067 bolt;

 - door, removed profile K518084X for WALA WR hinges, added WILKA indications, added magnetic contact;

 - door, added WALA WR 8010767X hinge, new door pull codes;

 - doors, added mounting plate for WILKA and Fuhr 833p, 834p panic hardware, added Aluprof rosettes;

 - doors, added DORMA bolts, cover cap for striker plate hole, corrected picking of Wilka hardware and Fuhr panic hardware;

 - door, added WALA handles, corrected picking;

 - door, supplemented lock striker 2p., added screws for MB-70, MB-86, MB-104;

 - door, corrected pull picking;

 - door, corrected picking of WALA handles;

 - doors, added Wala WUT hinges, corrected picking and working of FUHR locks, changed Wala pull code;

 - door, corrected picking of espagnolette extensions for FUHR locks;

 - Aluprof handle visualizations;

 - MB-DPA, added ISEO hook lock for MB-70 system;

 - MB-DPA, corrected handle codes for AGB lock;

 - Security systems, added RC3 for double leaf doors in MB-104, changed door picking in RC3 class, added GU-BKS RC3 SKG handle, retired Assa Abloy RC3 handle;

 - MB-RW, hardware - pushers marked with the T letter;

 - MB-SR50N IW, Savio Ribanta Incanto hardware - changed pusher codes, corrected picking;

16. Complementary elements for OD systems;

 - added installation profile for MB-70 windows;

 - added K433899X profile;

 - added angle bracket for film fastening and plastic vapour barrier;

 - added spacing of the bracket-fixing screws;

17. MB-EXPO, retired 19231111 access element;

18. MB in panels, added K431250X profile, MB-86 system and MB-104 Passive system added to the catalogue;

19. MB-SLIMLINE;

 - added new profiles;

 - changed pressure screw for the crosspiece connector, changed the screw fixing the cover of the decorative strip;

 - changed slot width tolerance of the floating mullion, added profiles to corner joints;

20. MB-SLIDER WINDOW, minimum and maximum handle height;

21. MB-Slide, MB-Slide ST;

 - changed opening restrictor, retired primer;

 - hardware - changed internal handles and additional Giesse handle;

22. PRICE LIST;

 - added structural colours B703 and RAL9007;

 - retired ASSA ABLOY handle and knob-handle;

 - hardware - retired ROTO elements;

 - hardware, retired Wala one-sided door handle, added DB703 structural colour variant;

 - hardware - retired MC elements from the MB-45S system;

 - added RAL9007 for profiles in structural colour variant;

23. Thermal calculations;

 - MB-SR50N EFEKT, extended module for inter-pane frames. The frames for EFEKT systems have a changed Psi coefficient;

 - MB-86, Uf values for panelled doors with crosspieces;

 - MB-70HI, rewritten Uf values from thresholds K(...)18235X for thresholds K(...)19289X;

 - MB-86US, supplemented Uf value for a commercial solution;

 - MB-59HS, MB-59HS HI, supplemented Uf values for sashes with steel reinforcements;

24. Changes in the program;

 - MB-78EI, reviewed selection and corrected glazing angles;

 - Inter-pane frames (construction-dependent psi in EFEKT systems)

 - export of the price list from MB-CAD, improved colour display

25. Corrected calculation;

 - MB-78 DPA corrected drop-down threshold;

 - MB-GlassBarrier improved length of the K430980X, K430981X profiles by the wall;

 - MB-86 added warnings for using hinges with angle profiles;

 - Roto Al Designo T&T, added opening restrictor;

 - MB-78EI corrected calculation of 14614959 flame retardant mass for EI90 variant;

 - MB-86 corrected clear passage size for Wala WU hinges;

***** VERSION 3.70, 2019-12-20

1. MB-59HS;

 - added narrow mullion;

 - corrected selection of hardware, glazing packers, and picking for typical constructions;

2. Façade systems;

 - MB-SR50N EI, modified glazing table, insulators and swelling tapes, new cover cap radius;

 - MB-SR50N, MB-SR50N HI, MB-SR50N HI+, corrected angular glazing;

 - MB-SR50N EI, corrected glazing table;

 - changed front gasket for transoms;

3. Hardware;

 - windows: removed trapezoid and arched windows for ROMBAluEuro, corrected pusher length for Roto AL and AL Designo, removed micro-ventilation for Aluprof handles in RotoALDesigno, corrected picking of micro-ventilation, changed scope of application the opening restrictor;

 - doors: added FKS hardware, corrected machining dimensions;

 - added ALUPROF LINE window handles;

 - windows: added MACO Multi-Matic hardware;

 - ALUPROF LINE handles - added maximum sash weight for handle 1924207X, updated functionality of Winkhaus hardware;

 - MB-77HS added alternative handles: 1910090X, 1910091X, 1910092X;

 - Aluprof handle names defined: CLASSIC, STANDARD, STYLES;

4. MB-78EI DPA, MB78EI DPA Supplement PL, new profiles, glazing accessories for glazing with safety gap, added new glazing;

5. MB-78EI DPA, MB78EI DPA Supplement PL, added minimum sash dimensions, changed attachment point of the sash width and height dimensions;

6. MB-DPA, added sealing strip, new handles, corrected sealing strip length;

7. MB-45, added threshold variant with brush for low-cost doors;

8. MB-86EI, updated catalogue which now complies with EN classification for fixed partitions;

9. MB-59HS, MB-59HSB, new dimensional relations;

10. PRICE LIST, changed the default SI profile selection option from K51 to pre-fabricated K71;

11. Corrections;

 - corrected length of glued muntin bars;

 - B3092 MB-86US added mounting studs;

 - Added options for Aluprof panels;

 - B3095 MB-60 corrected selection of Wala WX hardware;

 - B3120 MB-86 corrected selection of Wala WU hardware;

 - B3066 Foldline corrected threshold adjustment;

***** VERSION 3.69, 2019-10-22

1. MB-Skyline;

 - dodano odbojnik, wkręty, uszczelnienie połączenia skrzydeł;

 - korekty kompletacji okuć, dodano mocowanie odwodnienia bez użycia kształtownika podwalinowego, dodano łączniki ościeżnicy;

 - zmiana doboru akcesoriów;

 - dodano narożnik do profila odwracającego;

2. MB-SR50N IW dodano elementy nośne, zmiana wartości Fmax;

3. MB-70, MB-70US, MB-70 Casement, MB-78EI, MB-104 Passive, MB-Slimline, dodanie wkrętów do betonu;

4. Dodano funkcję zabudowa wewnętrzna - statyka liczona dla "parcia tłumu";

5. Dodano możliwość obliczania nietypowych narzutów na profile w dwukolorze;

6. Drobne poprawki;

 - MB-86, skorygowano obliczenia szyby dla poprzeczek;

 - MB-59HS Długości szyny i profila poszerzającego przy słupku w szkleniu stałym;

7. Cennik;

 - okucia Planet, zastąpiono kolor surowy kolorem anodowanym;

 - dodano krótsze długości dla profili K518267X-2260, K518773X-1130, K518823X-3400, K518824X-3400, K519181X-1130, K431526X-4500;

***** VERSION 3.68.1, 2019-10-02

1. Poprawiono kodowanie nietypowych kolorów okuć w zamówieniu materiałów, na listach produkcyjnych;

2. MB-59HS, poprawki dla rozwiązania ze szkleniem stałym (fix);

3. MB-86, korekta zachodzenia szyby dla przewiązek;

4. MB-78EI, dodano ostrzeżenia o szkle poza zakresem przy suplementach;

5. Okucia Simonswerk, zablokowanie dostępności dla drzwi panelowych;

6. Drobne poprawki wg zgłoszeń klientów;

***** VERSION 3.68, 2019-09-23

1. MB-SR50N;

 - MB-SR50N, added 5.5kN Type I fixed mullion/transom connection;

 - MB-SR50N, sliding mullion/transom connection Type E 3kN, Type I 4,2kN;

 - MB-SR50N EFEKT, MB-SR50N HI, MB-SR50N HI+, MB-SR50N PL, added sliding connection Type E 3kN, sliding connection Type I 5,5kN, fixed Type I 5,5kN;

 - MB-SR50N HI, adjusted glazing table - removed 009017 insulator for angular glazing +15 degree;

 - MB-SR50N EFEKT, adjusted glazing table;

2. MB-78EI;

 - Introduced supplement EU, AT, BE;

 - Added swelling tape on the frame side by the MB-78EI pin in MB-118EI;

 - Added glazing with façade seal for doors for Supplement PL and without supplement;

 - Changed glazing angle and corrected glazing ranges for EI15-EI60;

3. Hardware;

 - MB-60, added WALA WR hardware;

 - Changed dowel length, added ASSA ABLOY cable duct;

 - Changed hook plates for KFV AS2750 and KFV AS2600 hardware;

 - Changed codes for locks KFV AS2750 and KFV AS2600, strikes, corrected machining;

 - MB-86 Casement, MB-Ferroline, added GIESSE GSHD hardware;

 - Romb Alu, changed hardware picking for arched windows, added hardware for low-arched windows;

 - Changed microventilation of Roto hardware, corrected picking of ALU KARO trapezoidal window hardware;

 - Changed handles for GIESSE hardware, removed the UR variant for ROMB Alu, added accessories for ROMB hardware;

 - MB-SR50N OW, MB-SG50, MB-RW Changed codes and number of hardware;

 - MB-45EW, added door hardware for the system, corrected number of slides for G-U fittings, removed the transition Conect 200 from the locks G-U;

 - MB-DPA, changed Laguna hardware to GEZE ROLLAN;

4. Security systems;

 - Roto AL 160kg RC2 and RC3, added new hardware;

5. Complementary elements to OD systems;

 - Added window sash with a low rebate;

 - Added masking and assembly profiles;

6. MB-SKYLINE, removed external moving casement without handle scheme D;

7. MB-45, added profiles for K430014X crosspiece connection;

8. MB-RW, added 19100756 console code;

9. MB-Slimline, corrected thermal insulator code;

10. MB-59 Pivot, MB-60, removed 80112088 hold-open code;

11. MB-60, added 80462254 mullion cover cap;

12. MB-70, added processing of the safe stop strip by the threshold K412677X;

13. Aluprof, PANELS, added minimum sizes for panels;

14. Thermal calculations;

 - MB-86B, a list of Uf coefficients for floating mullion;

 - MB-SKYLINE, a list of Uf coefficients;

15. Program;

 - added non-standard colour description for the hardware;

16. Adjusted calculations;

 - MB-86 CASEMENT, FERROLINE, adjusted picking of handles;

 - MB-77HS, MB-70, MB-86, MB-104 improved profile lengths for glass corner solutions;

 - MB-Glass Barrier, corrected glazing, warnings about the dimensions of the construction;

 - MB-SR50N OW, corrected hardware;

 - MB-SR50NA, added spans link;

***** VERSION 3.67.1, 2019-07-11

1. Bug fixes in the software;

 - Aluprof panels, corrected operation with dekormat glazing;

 - list of cuts, numbering of sections;

 - descriptions of infills;

 - macros in the offers in MsWord;

 - dates in the offer;

 - currency in the offers;

 - barcode generation;

2. MB-78EI, up and down lock correction;

3. MB-70, MB-86, all-glass corner. Corrected calculations for -90 degrees corner;

***** VERSION 3.67, 2019-06-17

1. Aluprof panels, introduced visualizations of panel door infill;

2. MB-SR50N, MB-SR50N EFEKT, MB-SR50N PL, MB-SR50N HI, MB-SR50N HI+, added mullions 245mm, 285mm and mullion reinforcement;

3. MB-SR50N IW;

 - Withdrawn Siegenia-Aubi LM axent hardware, updated Savio hardware;

 - Hardware - pin-gears added to Savio fittings;

4.  MB-77HS, MB-77HSB;

 - Added masking profile and Hautau Comfort Close hardware;

 - added processing and fastening for Hautau Comfort Close hardware;

5. MB-86US, added new mullion profiles;

6. MB-SLIDER WINDOW;

 - added spring guards, added leaf restrictors;

 - correction of the spring guard code;

 - added minimum dimensions of floating leaves, changed calculations for four-leaf constructions, corrected picking;

7. MB-SLIMLINE (added frame without jaw and floating mullion;

8. Complementary elements for OD systems, added decorative strip K432259X;

9. MB-FERROLINE, added attachment of decorative strips;

10. MB-86US, added crosspiece connections to the frame K(...)18734X;

11. HARDWARE;

 - windows, corrected selection and numbering of pushers for ROTO AL hardware;

 - window, changed microventilation of Roto hardware, corrected picking of ALU KARO trapezoidal window hardware;

 - windows, corrected picking of trapezoidal hardware ALU KARO;

12. Thermal calculations;

 - MB-SR50N OW, adjusted Uf value for glazing above 41mm in Standard, SSG, EFEKT variants;

 - MB-59HS, MB-59HS HI, adjusted Uf values;

 - MB-104 Passive, added Uf values for the exterior glazing variant;

 - MB-104 Passive, adjusted Uf values for kickers;

13. Minor changes;

 - Panic HARDWARE, corrected selection of the lock cylinder D Function;

 - Double door panic HARDWARE - corrected selection of the lock elements;

 - MB-FERROLINE, no connectors for T-type connection - updated connections K()9505X and K()9501X;

***** VERSION 3.66, 2019-04-19

1. MB-SKYLINE, introduced new system (available for manufacturers who have obtained a certificate of prefabrication and assembly);

2. MB-GLASS BARRIER, changed gaskets and extended glazing options, new profiles for mullions and handles;

3. MB-86 FOLD LINE;

 - added extension and compensation profiles, new opening types, added FUHR 855GL type 3 PAS 24 hardware, low handles;

 - added façade pin, correction of FUHR hardware picking;

4. MB-SR50N PL, changed selection of insulators and spacers for glazing, changed dimensions of insulators;

5. MB-59S, MB-70, 80462254 added mullion cover cap;

6. MB-104 Passive, added frame K(...)19069X;

7. MB-86, added frame K(...)18669X and reinforced post K(...)18681X;

8. MB-86, changes to the panic door, added sealing inserts 80457150 and 80457151 and additional profiles K431699X and K432298;

9. Hardware;

 - transferred hardware from MB-78EI, added frames to Wala, Loira+, Dr Hahn, Simonswerk hinges, added lock and cable duct Dorma, picking corrections, added Simonswerk hinge for MB-78EI;

 - window, corrected Aumuller hardware picking, added chapter with picking for MB-86EI;

 - doors, changed minimum design dimension for GEZE Boxer 2-4 ISM door closer, corrected picking;

 - Corrected ROMB Alu hardware ranges;

 - windows, added mounting washer for fork handle in Roto hardware;

 - security systems, corrected Roto AL hardware picking, added RC2 class for Roto AL and Roto AL Designo for MB-86EI;

 - windows, modified microventilation for Roto hardware;

 - added additional lock KFV 80004309;

10. Changes to the price list;

 - withdrawal of the handle 1810517X in colour 2R8019 from the offer;

 - hinges 18107290 made available in anode and handle 1810502X in RAL 7016;

 - complemented colours for the rosette 1924113X;

 - removed bicolour for the K(...)18604X profile;

 - added bar 8001005X in black;

11. Minor changes;

 - MB-78EI, corrected calculations for silicone and firestop sealant;

 - MB-104, corrected selection of materials for supporting profiles;

 - MB-45 Office, improved calculation of the vertical clear passage size;

 - MB-45 Office, improved selection of the striker plate for electric strikes;

 - MB-45 DPA, corrected calculations of profiles K417851X, K433578X;

 - MB-SR50N A, selection of spacers for MB-70 frames;

 - MB-SR50N A, verified selection of roof strips;

 - MB-86, MB-104, corrected selection of smoke-proof door thresholds with double-sided panel;

 - MB-104, added subsill profile 009181;

 - MB-77HS, added subsill profiles 009108, 009110;

 - MB-FERROLINE, blocked ROTO OPN hardware for Casement frames without reversing profile;

 - Roto OPN CAS hardware, adjusted selection of handles;

 - shortened length of the supporting profiles;

 - MB-Slimline, blocked bolted connections of the transom on both sides of the crosspiece;

***** VERSION 3.65.1, 2019-02-26

1. MB-45 Office, width glass correction in whole-glass doors;

***** VERSION 3.65, 2019-02-08

1. MB-SR50N A, new system;

2. MB-SR50N, single glazing for interior construction;

3. HARDWARES - windows, new automatic Aumuller window closers;

4. MB-DPA, changes in covering strip;

5. MB-70, MB-86, MB-104 Passive, profiles of sash and covering strip for low threshold;

6. MB-SLIDER WINDOW, sping lenght was changed, pin for corner; correction of dimensional dependencies;

7. MB-Sunshades, rod 18106433 was deleted, correction of vertical strips;

8. Price list;

 - change of K121588 gasket cemmercial quantities;

 - 1mm aluminium plate was deleted;

 - HS Speed Limiter was deleted;

9. Minor changes;

 - MB-78EI, correction of glazing bracket;

 - MB-45 Office, door clear opening correction;

 - MB-45 Office, K417801X profile calculation correction;

 - Panel window, hardware material was added, for manual completation;

 - Roto OPN hardware, commit for wrong sashes was corrected;

 - MB-77HS, correction for strip 009038 lenght;

 - MB-70 correction of glazing beads in antiburglary solution;

 - MB-Slider window, calculaton of profile K430978X;

10. Software;

 - switch for internal/construction side was added (construction drawings module);

 - function of save last typical colour was improved;

11. Temporarly unavailable Dr.Hahn hardware was locked;

***** VERSION 3.64, 2018-11-30

1. MB-SR50N, MB-SR50N HI, MB-SR50N HI+, free glazing was updated (out of catalogue solution);

2. MB-SR50N, MB-SR50N HI, MB-SR50N HI+, MB-SR50N EI, glazing range change for transom-transom connection;

3. MB-SR50N EI, glazing table corrections, details of fixing doors;

4. MB-RW, extension of glazing up to 64mm, update of glazing table;

5. MB-SR50N IW, extension of glazing range up to 64mm;

6. Antiburglary hardwares;

 - antiburglary hardware, Roto ALU 540i and Roto Designo hardwares and class RC1 was removed, new Roto AL and Roto AL Designo hardwares;

 - antiburglary hardware, window hardwares, MB-Ferroline new system with RC1, RC2 viariants;

 - antiburglary hardware, correction of hardware set tilt-and-turn Winkhaus activPilot GIANT RC2;

 - antiburglary hardware, panel doors to antiburglary system was added;

 - Hardwares, doors, correction of electric-catch selection for Fapim OLTRE hardwares;

7. Hardwares;

 - windows, Siegenia axxent PLUS and ALU 5200: height of door handles was added, change K1 for floating mullion, Fapim Galicube: clamping catch from turn-only hardwares was removed, Fapim Panama Bar: variant of double doors was removed;

 - doors, finger protection PLANET was added;

 - doors, replacement of Fapim push-bar PANAMA BAR with Fapim OLTRE series;

 - doors, code numbers of sliding arms was changed, Assa Abloy door closer;

 - windows, Roto AL 160kg turn-and-tilt and floating mullion correction;

 - windows, handle height correction for Siegenia ALU 5200-DS floating mullion, Fapim Galicbe turn only clamping catch was removed;

 - Aluprof handles was set as default;

 - windows, adjusting block quantity was changed;

 - MB-EXPO, hardwares for doors was added, dimensional dependencies for glass for hinge with door closer;

8. MB-70B, MB-86B, MB-77HSB, new variang without thermal insulator (between glass and profile);

9. MB-70, MB-70HI, new K518501X, K618501X box-shape crosspieces was added;

10. MB-59HS, 121362 insulator, security anti-drill plate for RC2 hardwares was added, glazing manual, connection between K518873X profiles with a frame profile;

11. MB-FERROLINE;

 - connection of K(…)19501X and K(…)19505X crosspieces was added, glazing range with pad selection was changed;

 - K519518X profile for Roto OPN was locked;

 - new K(…)19506X frames was added, connections, insulator selection range;

 - new profiles, decorative strips, 80453138 glass pad was removed;

12. MB-70, MB-86, MB-104 Passive, glass corner, glazing strips cut was changed;

13. MB-SLIDER WINDOW, covering profile and plastic accesories was added;

14. MB-78EI, suplement PL corrections;

15. MB-SR50N OW, material of PX parallel opening hardware was corrected, change of distance elements and glass supperts;

16. MB-60, gasket closing corners corrections;

17. MB-86EI, window sill was added;

18. MB-86, 90deg profile was added;

19. Price list;

- 1850602X and 1850603X hinges in lacquer variant;

- new K431526X mullion in 4500mm length;

20. Removed;

- Eco Schulte GBS 71 lock;

***** VERSION 3.63.2, 2018-10-16

1. Not-avilable hardwares Roto Patio was locked;

2. Problem with Cutting List was solved (error Field "SE_INDEX" not found);

***** VERSION 3.63.1, 2018-10-02

1. MB-86 CASEMENT, we introduced a new system;

2. MB-INSTALLATION SOLUTION, we introduced the warm installation system (group of elements);

3. MB-80 OFFICE, we added a solution with screwed clamping strip, connection of glass edges, and modified glazing option;

4. MB-78EI, we extended the system to EW60 class, we have new glazing options with façade gaskets, and added a PL Supplement;

5. MB-45, we added profiles K430014X, fastener 80124119, fastener installation details K4178370;

6. HARDWARE;

 - we added door handles, FAPIM HERA;

 - doors, we added aluminium hinges WALA WR for MB-104 Passive and leaf profiles for hinges WALA WU;

 - we added tilt-and-turn hardware Fapim Magicube, window and door handles ALUPROF, and adjusted the hardware Romb Alu Euro, Fapim Galicube, Magicube, Hera;

 - doors, we removed the use of locks G-U for MB-60E EI, and adjusted picking;

 - windows, adjustment of the selection of handles in the turn-only hardware Romb Alu Euro, adjustment of the length of the pushing device;

 - windows, we added crosspiece numbers to the hardware Roto Alversa;

 - MB-EXPO, GEZE Patch Fittings replaced with GEZE Glass Fittings;

7. PRICE LIST;

 - we updated metal sheet price list;

 - we added colour 7016 for handle 1810502X;

8. WITHDRAWAL;

 - PRICE LIST, we withdrew the system MB-SR50 - system designation to be withdrawn after 01.01.2019;

 - MB-SR-50N IW, we withdrew the hardware Siegenia Axxent;

 - MB-59S, MB-59SE, MB-60, MB-70, we removed the locks MC, 3-point locks KFV and hinges WS;

 - MB-45, we removed the withdrawn hardware MC;

9. Thermal calculations;

 - MB-86EI;

 - MB-86B, we added Uf values for door sections;

10. ADJUSTMENTS;

 - MB45-OFFICE, we adjusted calculations for clear passage size;

 - MB-70 panel doors, we adjusted the length of the panel’s exterior sheet;

 - MB-86EI we blocked the availability of the narrow frame for the hardware Winkhaus;

 - we improved the insertion of doors 59 CAS DPA to the façade;

 - hardware, we adjusted the calculations of the number of inactive leaves 8000961X;

 - we improved the number of gutter elements;

 ***** VERSION 3.62, 2018-07-01

1. MB-SLIDER WINDOW, new system;

2. MB-GLASS BARRIER, new system;

3. MB-70HI, MB-70US HI, new panel doors;

4. MB-86 FOLD LINE, new FUHR 855GL type 3 hardwares, dutch profiles;

5. MB-SR50N HI, maximum hardware loads change;

6. MB-SR50N, division for Al and HPVC material for distance elements;

7. MB-SR50N HI, division for Al and HPVC materiald for distance elements;

8. MB-SR50N HI+, division for Al and HPVC materiald for distance elements, inserts for facades;

9. MB-SR50N HI+, new K430447X clamping strip and K431925X concealing strip;

10. Hardwares;

 - Wala WU hidden hinges;

 - Roto AL hardware, balace correction;

 - Wala WU new sashes profiles dedicated for hardware;

 - Roto AL 160kg, changes in sets;

 - 80009425 sheet repacement on 80009419;

11. MB-70B, Uf value;

12. PRICE LIST, remove Roto Patio hardware in software;

13. Minor errors;

 - MB-45 correction of support for louvre blade;

 - MB-45 OFFCIE clear door opening;

 - correction of lever calculation for Fuhr antipanic locks;

***** VERSION 3.61, 2018-05-01

1. MB-SR50N HI+, extension glazing range to 64mm, system modernization;

2. HARDWARES, new Roto Patio Alversa hardware;

3. MB-86 FOLD LINE, new FUHR 855GL type 3 hardware, new "dutch" profiles;

4. Price lists update;

***** VERSION 3.60, 2018-03-30

1. MB-59 SLIDE, MB-59G SLIDE;

 - system extended with doors that slide into the wall “Galandage”;

 - added door stops and working for bumpers, removed assembly kit from the 3-leaf construction;

2. MB-60E EI, added leaf as frame;

3. MB Slimline;

 - added gasket corner and windows diagrams;

 - added double-sided adhesive tape 121093;

4. MB-70, MB-70HI, added leaf as frame, corner joints of frames;

5. MB-60, added leaf as frame, corner joints of frames and leaves;

6. MB-45 OFFICE, added door hardware, working for hardware, glass size adjustments;

7. HARDWARE;

 - sealed Wala WR roller hinges for MB-104 Passive system with 120563 seal;

 - security systems, changes to ROMB hardware;

8. MB-86US, changed plug in the internal chamber of the leaf;

9. MB-77HS, MB-77HSB, added extending profiles, thermal insulators;

10. Complementary elements to the WD systems, added window gaskets - invisible drainage;

11. PRICE LIST, adjusted colours for FAPIM Loira hinges;

12. MB-SR50N PL, listed Uf coefficients;

***** VERSION 3.59.1, 2018-02-23

1. MB-86EI, introduced new fire-rated system;

2. MB-SR50N;

 - MB-SR50N HI, extended glazing option up to 64mm, system upgrade;

 - MB-SR50N, MB-SR50N HI, reviewed glazing table;

 - MB-SR50N OW, added new solutions with vertical & horizontal line, adjustments;

3. Price list;

 - added RAL colours to the satin list: 7016, 7021, 7024, 7035, 7043, 8019, 9005;

4. Hardware;

 - added GU locks;

 - security systems, added UR Winkhaus activPilot GIANT hardware for standard PVC leaves;

 - adjusted picking and packing for FUHR hardware;

5. MB-86, added all-glass corner;

6. MB-70, MB-104 Passive, added all-glass corner;

7. MB-70, MB-86, MB-104 Passive, all-glass corner - added dimensioning of the joint between the panes.;

8. MB-70HI, MB-70US, MB-70US HI, changed insulating inserts and gaskets;

9. Thermal calculations;

 - MB-86B, listed Uf coefficients;

***** VERSION 3.58, 2017-12-20

1. Price list;

 - re-project colur choice;

 - profile finishing in satin, structure;

 - MB-77HS, new colours of handles;

 - folding doors hanrdwares, new colours;

2. MB-SR50N;

 - glazing table extending to 64mm, system modernization;

 - new screw M8x35 was added;

3. MB-DPA, new update - MB-70 Casement system, replacement of reinforcement for automatic gear;

4. MB-77HSB, new catalogue for belgium market;

5. Hardwares;

 - new ROTO AL Designo hardwares, remove ROTO AluVision Designo;

 - set correction of floatimg mullion Siegenia ALU 5200-DS hardware;

 - remove MC locks;

 - remove Siegenia LM 4200 hardware;

6. MB-FERROLINE;

 - new profiles, SI variants, glozing from outside;

 - new windows cross-section, gluing of crosspiece;

7. MB-86US;

 - new crosspiece;

 - new reinforcement crosspiece:  K(…)18794X, K(…)18795X, K(…)18797X;

 - gluing of corners, removing of K718796X profile;

8. MB-70, changing of gasket corner;

9. MB-86, antipanic cross-sections;

10. MB-78EI, lock of antipanic Fapim Panama Bar lever for double doors solutions;

11. MB-SR50N RW, set way of bi-colours profiles painting;

12. MB-DPA, new crosspieces for MB-45 and MB-70 Casement, new MB-70 Casement glazing;

13. Thermal calculation;

 - MB-70B, MB-86B, thermal calculation dedicated for system;

 - MB-77HSB, value removed;

 - MB-Slimline, new values for profiles dedicated to dutch market;

 - MB-86, values for K518626X and K518659X profiles;

 - MB-70, MB-70HI, Uf values for low threshold;

***** VERSION 3.57, 2017-08-29

1. Hardwares;

 - Fapim Magicube, new hardware;

 - New hardware for windows with Tilt First hardwares Fapim GALICUBE and Bottom Hung Fapim MAGICUBE;

 - Eco Schulte, new handles;

 - New WALA WR hinges for narrow frames MB-70, display doors;

 - New hardwares FUHR 833 type 4;

 - Hardware change from Siegenia Axxent to Siegenia Axxent PLUS, change rules of hardware selection;

2. MB-60E EI, change of cover strip, lenght change of drop strip;

3. MB-SLIDE ST, new odd leg outerframe;

4. MB-59S, MB-60, MB-60US,  MB-70, MB-70 Casement, MB-70US, MB-86, MB-86B, MB-86US, MB-104, decrease of glass size with floating mullion windows;

5. MB-Slimline, new "dutch" profile;

6. Thermal calculation;

 - MB-104 Passive, Uf value for panel doors;

 - MB-SR50N, MB-SR50N HI, MB-SR50N HI+, Uf value for facade systems;

 - MB-SR50N EI, Uf value for facade system;

7. Program;

 - Correction of bicolour material code with decoral;

 - Correction of angle for bend profile;

8. Small changes;

 - MB-86, new facade frame K(..)8613X;

 - MB-78EI DPA, correction lenght of swelling tapes;

 - MB-60E EI, technical windows, insertion of crosspieces;

 - MB-DPA, suplement of glazing variant II;

 - MB-77HS, quantity of handle correction for D+G scheme;

 - MB-77HS, automatic set of sash width;

***** VERSION 3.56.1, 2017-07-19

1. New MB-CAD colours, improvements;

2. Minor erros as reported - fixed;

***** VERSION 3.56, 2017-07-12

1. MB-CAD's colours was rearanged (Colours: STD, NSTD, DEK, ANOD);

2. PRICE LIST;

 - new primers was added: epoxyd and seaside;

3. Sheet codes was changed;

4. MB-70B, MB-86B, new systems for Belgium market;

5. MB-77HS, New full-glass corner;

6. HARDWARES;

 - Roto AL 130 and Roto AL 160 - new hardwares;

 - lock unavailable solution for WALE handle and KFV locks;

 - new stay Defender Egress was added;

7. MB-SR50N EI EFEKT, new system;

8. MB-SR50N EFEKT, removal of the bottom thickness value of fillment in the left-open compartments;

9. MB-86 FOLD LINE, new ASSA ABLOY hardware for active sash, cover gasket 121331, change into glass table;

10. Thermal calculation;

 - MB-60E EI new Uf coefficients;

 - new report with Sw parameter (for French market);

11. Software correction;

 - MB-86, wall gasket was set as an option;

 - MB-70, MB-86, MB-104, improved calculation for hidden drenaige;

 - MB-77HS, scheme A, drive gear calculation correction;

***** VERSION 3.55, 2017-05-19

1. Hardwares:

 - MB-Ferroline, new antiburglary SKG hardware;

 - Disable panic push-bar in MB-104 Passive system;

 - MB-60E EI, latch codes for ROMB electric strike was changed;

2. MB-70HI, K618465X new reinforcement crosspiece;

3. Pricelist, untipical colours for roller WALA WR hinges was added;

4. Program;

 - Deleting crosspiece from doors was fixed;

 - Improved comments in MB-Foldline system;

***** VERSION 3.54, 2017-04-10

1. Price list;

 - PRICE LIST, we updated the price list of 2017-04-10;

 - We added anodized hardware Fapim Galicube;

 - We added short anodized thresholds;

2. MB-SR50N;

 - MB-SR50N OW System update;

 - MB-SR50N We added a rod to the spacing profiles K417914X, K417915X;

 - MB-SR50N IW, HARDWARE We added the elements for leaves > 100 kg, and depending on the width of the leaf;

3. Hardware;

 - We added hinges Wala and Dr Hahn to MB-104 Passive;

 - We added new angular hinge FAPIM and the fixing of angular hinge WALA;

 - We added 3-point locks FUHR for MB-Ferroline balcony door with low-level threshold;

 - New steering for rod in WILKA;

 - Changes to hardware Siegenia;

 - We withdrew hinges DR. Hahn 60AT with the fixing INOX in MB-104 Passive, adjustments to ROTO PATIO;

4. MB-45;

 - We added new fasteners;

 - Sections and installation of slats;

5. Update of glazing tables;

 - MB-SR50N EI;

 - MB-45;

 - MB-45 OFFICE;

 - MB-59HS;

 - MB-77HS;

 - MB-59 SLIDE;

 - MB-FERROLINE;

 - MB-60E Standardization with the glazing table MB-60;

6. MB-60 (HI), MB-70 (HI), MB-70 CW We added rabbetless frame;

7. MB-70;

 - We added internally-reinforced crosspiece profile K518465X;

 - increased number of slides for KFV locks;

 - (HI) We changed the thermal insert in the profile K(…)8126X;

8. MB-59HS We added an extending profile;

9. MB-77HS We added new anti-drill plate in RC2 solution;

10. MB-86, MB-86US New breaks for SI variant;

11. MB-86 FOLD LINE We added a slide to the lock;

12. MB-SLIDE We introduced new rollers;

13. MB-Slimline We changed the material for supporting profiles;

14. Additional elements for window & door systems We added retrofit profiles of the system MB-70HI in K61 variant;

15. SP-45, SP-60, we removed the system SPECTRAL, no longer available for sale;

16. Thermal calculations;

 - MB-70 CASEMENT Frames MB-70 without retrofit profile;

 - MB-86 Crosspiece as a protective element;

 - MB-59HS Assemblies with new retrofit profile;

 - MB-86 Uf values for Dutch profiles;

17. Program;

 - We improved the precision of the clear passage size due to the position of the hinges (frame-leaf position);

***** VERSION 3.53, 2017-02-10

1. MB-SR50N PL, new system Vertical/Horizontal Line;

2. MB-77HS, new angled profiles - 270 degrees;

3. MB-45, new windows opening outside;

4. Changing in glazing tables:;

 - MB-70, MB-70PD, MB-70SG, MB-70CW, MB-70US;

 - MB-59S, MB-59SE, MB-59S Casement, MB-59S Pivot;

 - MB-60, MB-60E, MB-60US, MB-60E EI;

 - MB-70 Casement;

 - MB-86, MB-86US;

 - MB-104 Passive;

 - MB-Slimline;

 - T1432, MB-45;

5. Upgrade in antiburglary hardwares;

 - new ROMB RC2 hardware;

 - new PA hardwares (Winkhaus activPilot Comfort PADK);

6. Hardware upgrades;

 - new Roto H AL, Giesse, WSS, Sobinco - handles and hinges;

 - reed switches for doors and windows;

 - new fixing elements for Fapim Loira+ hinges;

 - Fapim hardwares was set as default;

 - new PA hardwares (activePilot Comfort PAD) and WALA WR hinges for MB-86;

 - new hardwares for windows opening outside MB-45 and MB-FERROLINE;

 - Fapim Loira+ TR hardwares for MB-86 dors in MB-Ferroline frame was deleted;

 - correction of completation Winkhaus RO hardware;

 - MB-78 EI, push-bar change for Eco Schulte;

7. MB-SLIDE, new frames profiles: K518357X, K518359X;

8. MB-SLIDE, new corner connection;

9. MB-45, T-connection material change;

10. MB-FERROLINE, new sash corner connection;

11. MB-59S (Casement + HI, SE) MB-60 (E, US + HI, E EI), MB-70 (Casement, US + HI), MB-86, MB-104 Passive, lenght of H-profile was changed;

12. MB-86, MB-86US, new insulators for SI variant;

13. MB-104 Passive, distance between frame and facade profiles was increaced;

14. Price list changes;

 - new DECORAL colours: S208, C106, D210, S110, M102, K101, D502;

 - 1810522X hinge - anodized colour was added;

 - 1910084X push handle - INOX colour was added;

 - WALA 8000924 shield - INOX and CHROMMATE colour was added;

 - K430229X profile in short lenght: 1350 mm;

 - threshold profile: K518770X, K519180X, K518234X, K518235X i short lenght: 1130 mm;

 - new push-handle for panel door was added (price list only);

 - MB-70HI, profile for panel windows was added (price list only);

15. Thermal calculation;

 - MB-70, MB-70 HI, renovation profiles;

 - MB-104 Passive, doors;

 - MB-70 Casement, profiles with strip changing direction;

 - MB-60, MB-70, MB-70HI, MB-77HS, MB-104 Passive, MB-Slide, MB-Slide ST for profiles for the Dutch market;

 - MB-60, crosspiece reinforced inside;

 - MB-70US, dodanie wartości Uf K518203X facade frame;

 - MB-FERROLINE, correction for some cross-sections;

16. Correction;

 - MB-70, lenght of eaves for double-doors;

 - MB-86, K518773X threshold connections;

 - Smoke-proof dropping treshold calculation;

 - MB-86, panel doors, lenght of glazing bead;

17. Software, new french language was added;?

***** VERSION 3.52.2, 2016-12-02

1. HARDWARE:

 - new Fapim Loira+ fixing;

 - new antiburglary Roto Designo window hardware;

 - new ROTO PATIO 160Z and 200Z + hardware for construction with low threshold (MB-70 and MB-104 Passive systems);

 - new PVC Winkhaus hardware;

 - antiburglary systems, new PVC Winkhaus RC2 hardware + WEKA SKG** handle details;

 - slide for lock latch into MB-104 Passive, screw change in FUHR lock, minor changes;

2. Price list, new Dekoral colour (S208 Fir, C106 Dark cherry, D210 Rustic oak, S110 Pine, M102 Ebony, K101 Chestnut, D502 Swamp oak);

3. Sandwich Panel-Based, new profiles for panels 250 mm;

4. MB-60E EI, connector correction;

5. MB-70 Auxiliary elements, new HI variant for renovation profiles;

6. Thermal calculation;

 - MB-78EI;

 - MB-70 renovation profiles;

 - MB-70US facade frame;

 - MB-Ferroline;

 - MB-60 crosspieces reinforcement from inside;

7. Software;

 - (for client wish) optimization if gypsum inserts (Program option - Calculation 2 - "Some profiles (e.g. gypsum inserts) calculate as gaskets)". Disable this option increase material consumption in case of optimization;

 - unavailable bi-color with anodized parts was locked;

8. Minor errors;

 - automatic selection of window sashes during system changes was improved;

 - MB-59HS, MB-77HS hardware selection (depend of sash kind) was improved;

 - MB-60, add-on profiles, next to doors was completed;?

***** VERSION 3.51, 2016-09-26

1. MB-86 Fold Line, new fold doors system;

2. MB-Ferroline, door solution was added;

3. HARDWARE;

 - bolt sets in Fapim Galicube was changed;

 - new pins in Fapim Galicube;

 - Siegenia ALU 5200, new hardware;

 - new Wala WR roller hinge for frames as MB86 door sash, lock keep in Fuhr 870 anitpanic was changed;

 - information - minimal handle height in Roto hardware;

 - new Fapim hardware for balcony doors and Loira+ hinges for MB-Ferroline system;

4. MB-59 SLIDE, correction of brush tightening and gaskets on frame;

5. MB-60E EI, new frame and Wala shootbolts;

6. MB-70;

 - low threshold and facade widows fixing (at hinge side);

 - screw for brush titghtening (next to threshold) was changed;

7. MB-70US;

 - angled frame connection was added;

 - low threshold and facade widows fixing (at hinge side);

8. MB-70 Casement, low threshold and crosspiece in window;

9. MB-86;

 - facade widows fixing (at hinge side);

 - possibility of door sashes as a frames;

 - doors with shopwindow without strip changing direction profile and new threshold fixing;

10. MB-104 Passive;

 - outside glazing and low balcony threshold;

 - doors with shopwindow without strip changing direction profile and door sashes as a frames;

11. MB-78EI, comments to need to use fireproof silicone;

12. MB-Slimline, static for reinforcement crosspieces;

13. Antiburglary systems, Weka SKG** handle;

14. MB-SR50N, increase of use type E connector for glazing 36-40 mm;

15. Thermal calculation;

 - MB-60, MB-70, door sash as a frame;

 - MB-70 Casement;

 - MB-60, MB-60HI, outside glazing;

 - MB-70, MB-70HI cross-section with K518134X crosspiece;

16. Price list;

 - coating surfaces data adopted as decorative surfaces (from system catalogue);

 - Aluhard handled and shields was removed;?

***** VERSION 3.50.1, 2016-07-29

1. MB-86 Fold Line, new fold doors system;

2. MB-Ferroline, door solution was added;

3. HARDWARE;

 - bolt sets in Fapim Galicube was changed;

 - new pins in Fapim Galicube;

 - Siegenia ALU 5200, new hardware;

 - new Wala WR roller hinge for frames as MB86 door sash, lock keep in Fuhr 870 anitpanic was changed;

 - information - minimal handle height in Roto hardware;

 - new Fapim hardware for balcony doors and Loira+ hinges for MB-Ferroline system;

4. MB-59 SLIDE, correction of brush tightening and gaskets on frame;

5. MB-60E EI, new frame and Wala shootbolts;

6. MB-70;

 - low threshold and facade widows fixing (at hinge side);

 - screw for brush titghtening (next to threshold) was changed;

7. MB-70US;

 - angled frame connection was added;

 - low threshold and facade widows fixing (at hinge side);

8. MB-70 Casement, low threshold and crosspiece in window;

9. MB-86;

 - facade widows fixing (at hinge side);

 - possibility of door sashes as a frames;

 - doors with shopwindow without strip changing direction profile and new threshold fixing;

10. MB-104 Passive;

 - outside glazing and low balcony threshold;

 - doors with shopwindow without strip changing direction profile and door sashes as a frames;

11. MB-78EI, comments to need to use fireproof silicone;

12. MB-Slimline, static for reinforcement crosspieces;

13. Antiburglary systems, Weka SKG** handle;

14. MB-SR50N, increase of use type E connector for glazing 36-40 mm;

15. Thermal calculation;

 - MB-60, MB-70, door sash as a frame;

 - MB-70 Casement;

 - MB-60, MB-60HI, outside glazing;

 - MB-70, MB-70HI cross-section with K518134X crosspiece;

16. Price list;

 - coating surfaces data adopted as decorative surfaces (from system catalogue);

 - Aluhard handled and shields was removed;?

***** VERSION 3.50, 2016-07-08

1. MB-Folding door, we set the default outside view of the construction, we adjusted the algorithm for calculating the size of leaves;

2. Muntin bars, we adjusted the length of the mounting tape for muntin bars;

3. MB59HS, we disabled the notification about exceeding the load capacity of the rollers;

4. Adjustments to the clear passage size in accordance with the notification;

***** VERSION 3.50, 2016-07-08

1. MB-59 SLIDE New sliding door system;

2. HARDWARE;

 - we added window hardware Romb Alu Euro;

 -We removed locks FUHR with tongue block;

 - we modified door striker plates for electric strikes Romb (MB-60E EI);

3. MB-86 We added covers for reinforced mullions;

4. MB-70 We added a cover for reinforced mullions and extended the glazing table with Standard clips;

5. MB-60;

 - we added a cover for reinforced mullions and extended the glazing table with Standard clips;

 - we added invisible drainage;

6. MB-78EI;

 - we added new locks Fuhr 870 type 11, we modified striker plates for locks Fuhr 833p;

 - we adjusted the selection of striker plates in panic locks Wilka;

7. MB-59S CASEMENT We added a solution with floating mullion;

8. SECURITY SYSTEMS We added solutions for MB-104 Passive, we changed the selection of glazing washers and added tilt&turn window hardware;

9. Program;

 - improved clear door opening;

***** VERSION 3.49, 2016-06-01

1. MB-70 Casement - new outward opening window system - this system replaces the current solution for smoke exhaust windows in MB-70;

2. MB-Ferroline - new inward and outward opening window system;

3. MB-104 Passive door, the system has been complemented with door solutions;

4. MB-60E EI;

 - this system can now be combined with MB-78EI and MB-118EI;

 - the selection of expansion joint backing has been adjusted for inactive leaf in outward opening windows;

5. MB-70;

 - doors solutions with sliding window have been complimented;

 -the range of application of window sashes has been extended, new expansion joint backing for the corner of the locking sash has ben added;

6. MB-59HS steel profile-reinforced leaves and security hardware solutions RC2 have been added;

7. MB-45 OFFICE the possibility to cut the clips on glass compartmentations has been added;

8. MB-SR50A Fixing of windows and doors has been standardised;

9. MB-SR50N Corner mullion sections have been standardised;

10. MB-TT50 new fixings of facade mullions have been added (standardisation with MB-SR50N solutions);

11. HARDWARE;

 -Fapim Panama Bar surfacing panic hardware has been added;

 -Roto OPN hardware has been added to Casement windows;

 - the operation of Sobinco Salto Casement hardware has been improved (parameterized hardware);

 -the unnecessary screws from the completion of Wala handles have been removed;

 - dimensioning of the position of door hinges and new drawings in colours corresponding to the manufacturer have been added: Wala-green, Fapim-red, Sobinco-yellow, Simonswerk-violet, SWW-grey, DrHahn-blue;

 - the possibility to control the positions of the hinges on the leaf (for Uni_Link) has been added;

 - the possibility to check the position of the transom at the height of locks that prevent its installation has been added;

12. Facade hardware - sliding hardware (“shoe”) has been added in the fixed variant;

13. Accessory pieces;

 - MB-70, renovation profile has been added;

14. PRICE LIST;

 - profiles K518813X, K518814X L= 3400 mm have been added;

 - MB-60E EI, addition of shorter profiles: K518237X (1130 mm), K518263X (1130, 2260 mm), K518266X (1130, 2260 mm);

 - colour drainage has been added 8045502X w RAL7016;

 - facade mullions L= 4500 mm have been added (K431595X, K430484X, K431596X, K431525X);

 - the incorrect price of the door pull 8030126X has been corrected;

 - 2 mm sheet to the program has been added (5075619X), prices of all sheets have been completed;

15. Thermal calculations;

 -MB-86, thermal conditions for Dutch profiles have been completed;

 -MB-SLIMLINE, thermal conditions have been added to the system;

 -MB-SR50N EFEKT, Uf values for the extended range of glazing have been completed;

 - MB-59HS thermal conditions have been added to the system;

16. Withdrawn elements;

 - MB-59SE, MB-60E, KFV lock 80004661 has been withdrawn;

 - horizontal pivoting window self-closer - Quickline has been withdrawn;?

***** VERSION 3.48, 2016-03-22

1. MB-45, new profile K430016X, reinforcement from the inside;

2. MB-59 HS New odd leg outerframes;

3. MB-70US HI New K618203X frame;

4. Add-on, angled profiles: follow-up in: MB-86, MB-104, MB-77HS, MB-59HS systems;

5. MB-104 Passive, angled crosspiece was added;

6. MB-SLIDE ST Fix sash with 1-side reinforcement variant was added;

7. MB-78EI, new air vent was added (element groups);

8. Price lists;

 - pull-handles WALA 8030125X, 8030126X in colours INOXANOD, INOXSUR was removed;

 - lenght of K417890X climping strip was changed on 7000mm;

9. Software;

 - new option to disable question about recalculate offers (Don't calculate construcion price in next offer). Program options - Offer prints;

 - new technologicial waste was set for ADAC profiles - 40mm (anodized profiles have 100mm waste);

***** VERSION 3.47.1, 2016-02-22

1. The program, an option that disables the prompt for re-calculation of the offer has been added (do not calculate prices with the next offer). Program options-Prints offer;?

***** VERSION 3.47, 2016-02-10

1. New system with increased fire resistance has been introduced (MB-60E EI);

2. HARDWARE;

 - Alternative fixing of Wala WX hinges with the use of stainless steel (INOX) quick-screws has been added;

 - Alternative fixing of Wala WX hinges with dowels has been added;

 - Alternative fixing for Dr Hahn 60AT hinges with the use of stainless steel (INOX) quick-screws has been added;

 - The range of application of Dr Hahn 60AT hinges has been extended;

 - The minimum height of the handle from the top of the leaf in Roto and Siegenia hardware has been limited;

 - The extension of the locking device in locks Fuhr 855GL type 3 & 4 and Fuhr 834 has been added;

 - The range of application of Roto Designo hardware has been extended;

 - The central locking (non-panic locking) in panic locks can now be selected;

 - Threshold strikes have been associated with compatible thresholds;

 - The completion of Eco Schulte handle for standard locks has been added;

 - Wala WR roller hinges have been added to MB-78EI;

 – Wala WR roller hinges for odd leg outerframes in MB-86 have been added;

 - The stay 390 has been changed to 400 in Roto Alu 540i tilt-and-turn hardware;

 - Geze Boxer self-closers have been added in MB-60E EI;

 3-point lock KFV AS2750 has been added in MB-60E;

 - The height of the lower holding fixture of Wala WR roller hinges has been adjusted;

 - MB-60E, the lock 80009282, withdrawn by the manufacturer, has been removed;

3. MB-SR50N EFEKT - the glazing table has been extended up to 64 mm of the glass unit thickness;

4. BURGLAR-RESISTANT SYSTEMS;

 - The extension of the locking device in Fuhr (RC2) locks;

 - The possibility to use 2-hinge leaf (RC2) is admitted;

5. ADDITIONAL ELEMENTS;

 - Renovation profiles have been added to MB-70 system;

 - Elements have been added to MB-104 Passive;

6. MB-86US The range of application of T-type diagonal connections has been extended;

7. MB-80 OFFICE Mounting schemes have been added;

8. MB-60E expansion joint backing for inactive leaf corner after the MB-60E EI has been standardised;

9. MB-59HS, system updates for sealing cords, glazing cords, extension for the profile K518853X, corner sealing;

10. Thermal calculations, supplementation of subsequent, calculated sections;

 - MB-86 for doors in continuous shopfront;

 - MB-86 glazing from the outside, low-level threshold;

11. Program;

 - change of program used to connect the remote desktop. Netviewer has been replaced with AnyDesk;

***** VERSION 3.46.1, 2015-12-08

1. Electronic material order was improved with bicolour - part of: RAL7016, RAL7024, RAL9007;?

***** VERSION 3.46, 2015-11-10

1. PRICE LISTS;

 - new, painted colours: RAL7016, RAL7024, RAL9007 (standard price);

 - price for colour RAL9006 was reduced (standard price);

 - profiles: K518335X, K518336X, K518748X, K518750X in 2260 mm lenght was added;

2. MB-86, MB-104, hidden drenaige solution was added;

3. HARDWARES;

 - new Assa Abloy door closers, new Wala pull-handles;

 - variant roses for roller locks;

 - Fapim handles and hinges, new untypical colours;

 - Fapim hingies, new anodized colours;

4. Facade Systems;

 - additional climping strips;

 - screw correction for distance profiles;

5. Profile lenght with K418005X angled bar;

6. Thermal calculations;

 - MB-60HI;

 - windows/doors insterted to facade;?

***** VERSION 3.45, 2015-10-09

1. The possibility to export data to the program Etykieta Energetyczna Stolarki (available on thermal calculation print);

2. MB-59HS, new Tilt&Slide bacony door system with a thermal barrier;

3. HARDWARES;

 - new Simonswerk hinges and Fuhr locks for high doors were added;

 - new bottom-hung sash hardwares (PVC) - Romb Romb TAKT150;

 - drawing of hinges and locks on construction drawings according to hardware producers: Fuhr-light orange, Wilka-red, EcoSchulte-brick colour, Wala-light green, KFV-pink, Romb (Karo)-yellow, MC-blue;

 - door hinges statics: load capacity, range, large loads (e.g. public utility), small and medium loads (e.g. a detached house);

 - handles and roses Euroline in untypical colous brass and brown was removed;

4. Antiburglary systems;

 - hardware material available in construction with dimensions out of range;

 - flat profile for K518102X i K518122X was added (RC4 hardwares);

 - MB-78EI, hardwares for high doors;

5. MB-45 OFFICE, MB-EXPO: unavailable profile location was locked;

6. MB-60, MB-70, MB-86, type T connection for odd leg outerframes was added

7. MB-59, MB-60, MB-70, MB-86US, MB-104 Passive, dreinage and ventilation schemes wash changed;

8. MB-60E, corner tightening 80124370 was added;

9. MB-70;

 - new PVC sash opening outside;

 - new, reinforced profiles;

10. MB-86;

 - threshold variant K518770X+thermical insulation;

 - inserts to corner in panel doors were corrected;

 - new odd leg outerframes were added;

 - new, reinforced profiles;

11. MB-78EI, new glass dilatation, inserts for shootbolt with rod;

12. Extrabond, possibility of gap width in range 10-20mm

13. MB-45 OFFICE lenght of glazing strips in dilatation was fixed;

14. MB-80 OFFICE;

 - new fillings type (opaque glass, furniture boards, plasterboards);

 - crossection fixed;

 - under mullions pads;

 - local profile parameters;

16. MB-SLIDE;

 - sash width view was fixed, typical constructions was fixed;

 - frame variant masking with K430840X profile;

17. MB-60, new, reinforced profiles;

18. MB-86US, new facade frame to MB-SR50N EFEKT;

19. MB-TT50, antiburlary solutions;

20. Folding doors, new parameter - handle height;

21. MB-45 new reinforced crosspiece K417808X+K413923;

22. MB-SR50N, MB-SR50N EFEKT - type "T" transom connection: K417880X, K431541X, K431542X. Maximum load 45kg on side;

23. Thermal calculation, next part;

 - MB-SR50N RW;

 - MB-86, new profile K518627X;

 - MB-70 (HI), door opening outside with safe closure;

 - MB-SLIMLINE;

24. Drawings;

 - cross-section color drawings was unified;

 - construction parameter drawings was unified;

25. Additional;

 - remove unavailable untypical colour RAL9016R81;

 - default colour - anodized for threshold K411035X;

 - additional parameter - no fixing element;?

***** VERSION 3.44.1, 2015-08-07

1. Hardwares;

  - Fuhr locks to high sashes was added;

  - door sashes reduction (1mm) if you use multipoint locks and antipanic locks;

2. MB-45, glass dimension error by buttons: "automatic construction definition" and "check if the construction is correct";

3. Facade systems, glass dimension error for 40mm glass thickness;

4. Multiple definition "couple/divine T-type profiles" was fixed;

5. MB-SLIMLINE: Lenght of Georgian/feature bars was corrected;?

***** VERSION 3.44, 2015-07-03

1. MB-Slimline, new system;

2. MB-80 Office, new system;

3. Some small mistakes was fixed;?

***** VERSION 3.42, 2015-04-07

1. MB-SR50N EFEKT, MB-SR50N HI, MB-SR50N HI+, MB-SR50N IW;

 - new system update (e.g. new transoms, change in washers, new transom-mullion connectors);

2. MB-SR50N EI;

 - fireproof inserts was deleted, glazing change, new transoms;

 - glazing changes for facade and skylights;

 - angled glazing changes;

 - material change in glazing range: 38-40mm;

3. MB-104 Passive: new central gasket corner, window sash statics information;

4. Antiburglary systems;

 - RC3 hardwares for 2-sash doors, Assa-Abloy and EcoSchulte handle was added;

 - minimal sash dimension 9mm fixing set in RC4 solution;

5. Commits for GEZE OL90N, Roto Patio hardwares and low threshold was improved;

6. MB-77HS: threshold K432031X strip with fix glazing solution was fixed;

7. Static calculations, next calculation cross-sections;

 - MB-60, MB-60E;

 - MB-104 Passive;

8. MB-60, 009025 threshold length in shopwindow construction fixed;

9. MB-SR50N EFEKT, unavailable glazing frame commit was improved;

10. MB-SR50, MB-SR50 EFEKT, unavailable mullions for wall-roof angled connector was locked;

11. MB-86, angled hinges for additional reinforcement was locked;

12. MB-45, correction of glazing K415245X profile;

13. MB-DPA, cutting part of K518240X, K518242X profile, next to threshold was corrected;

14. Additional changes;

 - hardwares, default windows standard was set: tongue handle without a key, in TF - tongue handle with a key;

 - MB-SR50N cross-section correction;

 - correction of quantity of drainage covers;

 - MB-45, clear door opening correction for smoke-proof dropping treshold;

?

***** VERSION 3.40.2, 2015-03-09

1. Correction of transom: K518658X, K818658X width (it is important when glass ordering);?

***** VERSION 3.40.1, 2015-03-02

1. Revert default settings of transom position in door sash (calculated from rail without strips, next to threshold);

2. Optional settings of transom position in door sash (calculated from rail with strips, next to threshold) can be set in edition option in Drawing Editor;

3. Sheet optimization was improved - on Material Order prints can set sheet rotation;

4. Sheet colours was inserted despite of lock of prices;?

***** VERSION 3.40, 2015-02-17

1. Increase of Extrabond panels (1 EUR/m2);

2. MB-104 Passive, windows part was added;

3. MB-77HS, new corner solutions and fix glazing;

4. MB-SR50N

- new system upgrade for RMG 1, RMG 2.1, K413923X parameters (e.g. new transoms, change in washers, new connectors transom-mullions);

- new variant of facades - Vertical Line;

5. MB86, new transom 198mm;

6. MB-78EI (new profile K518149X, remove glazing with workings);

7. MB-70 (HI), new transom 68mm;

8. MB-SR50N HI+, MB-RW, new insulator 121158;

9. MB-SR50N (HI, HI+, EFEKT), material to connect transom 209,5 mm was added;

10. MB-70, MB-86, Carrier profile was added;

11. Aluminum sheed was added (size: 1000x2000; 1250x2500);

12. MB-TT50: quantity of screews to mount distance elements next to windows/doors;

13. HARDWARE;

- New roller Wala hinges;

- update of windows hardwares: Roto Patio and Geze OL90N for MB-104 PASSIVE;

- Wala WS hinges were removed from system;

- Door hardwares and MB-78EI, new inserts with free run for single opening door was added;

- MB-86, new roller Wala WR hinges for wide sash was added;

14. MB-86;

- Lenght error fixed of strip around inward opening door with shopwindows;

- Corner inserts for transom profiles: K(..)8659X, K(..)8660X;?

***** VERSION 3.39.1, 2014-11-06

1. MB-DPA;

 - overlays of sliding doors to frames and crosspieces in new created orders were changed - in orders latest than 3.39 version sash overlays was no changed;

 - safe glazing range in shop-windows, next to sliding door was enlarged;

 - Wala new handle;

2. MB-60, MB-60E, MB-70, MB-70HI: New door sash dilatation profiles;

3. Hardwares;

 - new Fapim Galicube hardware were repleaced Galiplus 2 hardware;

 - antipanic locks with a handle made available in invard opening doors;

 - DrHahn VL hinges made available with reinforcement profiles;

 - Wala WR roller hinges made available in odd leg outerframes in MB-70 i MB86;

 - GEZE OL90N made available in MB-60E;

 - new set of Euroline or Ecoschulte one-sided handle with one-sided pull-handle with external side Wala rose;

 - Karo hardwares with Tilt&Slide hardwares next to floating mullion was disabled because of difficult assembly;

 - MC Aluhard lock in MB-60 and MB-60E was locked because of no assembly possibility;

4. Facades systems;

 - MB-SR50EI, MB-SR50N EI: Unavailable materials at the end of facade was locked;

 - MB-SR50A, thickness of metal plating at the end of facade;

 - MB-TT50, new elements to insert windows/doors to facades (high glazing range);

 - MB-SG50 window, material for out or range hardwares;

 - MB-86, new elements to insert windows/doors to facades (high glazing range);

5. MB-78EI;

 - new option to increase glass dimensions in construction parameters (for new created construction only);

 - new function moving fireproof inserts when doubled doors with anipanic hardware or central locking;

6. MB-45, new corners in passive doors;

7. MB-60, correction of tightening inserts in passive doors;

8. MB-45 OFFICE, asembly of SG Door Jamb next to wall made available;

9. MB-EXPO, new glass joining strip;

10. MB-77HS;

 - commit: manually window width in fix window from rail site (except of K Fix scheme);

 - commit: verify of doubled colour 3-rail frame with Sales Departament;

11. MB-SLIDE, correction of 80462168 hole cap on sash;

12. MB-86, correction of clear door opening in panel doors;

13. Thermal calculations, next calculated sections;

 - MB-70SG;

 - MB-70, MB-70HI, MB-70US, MB70 PIVOT for windows in facades;

 - MB-60E;

 - MB-SR50N IW;

 - MB-SR50, MB-SR50N, value correction of 46mm glazing;

 - MB-SR50N OW;?

***** VERSION 3.38.1, 2014-09-04

1. Correction of rabat system - in some cases with disable option untypical prices, program include option: : "untipical prices INCLUDE material discount";

2. MB-60, overlay between sash profile and frame in facade was fixed;?

***** VERSION 3.38, 2014-09-01

1. MB-SR50N, MB-SR50N HI, MB-SR50N HI+, MB-SR50N EI, MB-TT50, new wall-roof connection;

2. MB-45, MB-59S, MB-60(US), MB-70(US), MB-86(US), additional glazing washers when height/width > 1800 mm;

3. MB-86, increase Tilt&Slide sash dimensions;

4. HARDWARE,  range for Roto Designo was expanded;

5. MB-60, MB-70, new angular connections for sashes: K518301X, K518302X, K518331X, K518332X;

6. MB-60, MB-70, new angular sash connection;

7. MB-78EI;

 - new antipanic Fuhr and 1-point Wilka locks;

 - correction of tightening insert in technical window;

8. MB-45 OFFICE, unavailable profiles in SG Door Jamb solution was locked;

9. MB-45, MB-60, MB-70, corners in passive doors was corrected;

10. MB-SR50N, added commit with unavailable connection between transoms: 169,5 and 189,5 mm;

11. MB-45 Swing doors,  correction of corners;

12. MB-60BP, MB-70BP, doors was made availablem in facades;

13. Next package of old corners was removed;?

***** VERSION 3.37, 2014-07-18

1. MB-SUNPROF, new roller shutter profiles, previous shaded ones have been withdrawn;

2. MB-60US (HI), MB-70US (HI), new leaf batten profiles have been added;

3. MB-RW, new, roof window system in façade systems MB-SR50N & MB-TT50;

4. TT50: change of the maximum load capacity for mullion-transom connection;

5. Hardware;

 - MB-78EI Touchbar, disassembly of handles and levers in anti-panic locks, EcoSchulte handles and knobs made available (anti-panics) in usual locks: Fuhr and Wilka;

 - New locks: Fuhr, and new anti-panic locks Fuhr;

 - MB-59S Casement, restricters to Sterling knife hinges have been added;

 - MB-86, new length for pushers in solutions with a low threshold;

 - Adjustment of components selection for the automatic locking of the inactive leaf in all systems;

 - Anti-burglary elements - improved selection of insulation inserts;

 - New tilting window hardware Geze OL90N;

6. Thermal calculations, MB-60US, MB-60US HI, new thermal calculations for the system have been added;

7. MB-86, adjusted dimensions of the internal panel in two-sided panelled door;

8. MB-45 OFFICE, limitation of glazing ranges in adhesive frame;

9. MB-SLIDE, single-side reinforced leaves in 3-track structures have been added;

10. MB-45, MB-60, MB-70, IX adjusted values for profiles “with a box”;

11. MB-SR50IW, the system has been withdrawn;

12. MB-DPA, adjusted overlapping of leaves on a vertical plan for doors stuck into the façade, adjusted connection of profiles;

13. MB-86US, improved selection of inserts in the AERO variant;

14. MB-SG50, MB-SR50, MB-SR50N OW, change of rivnuts for fixing the clips and the fixed SG window;

15. MB-77HS, change of the maximum load capacity and the leaves’ width;

16. MB-SR50 EI, blocked possibility of using “shoe” fitting;

17. MB-70, improved selection of the upper sealing inserts in locking leaf;

18. Further crimped corners withdrawal, they are replaced by universal corners;

19. MB-SR50 EI, MB-SR50N EI, technical window of the MB-78EI system is now authorized;

20. Complementary elements. A change in the connection of the decorative bead (“industrial”);

21. Additional payment for the 8R colour on the printout “Materials Order with extra" is now available;

22. MB-SG50 in MB-SR50PL window, adjusted length of stuck insulators;

23. MB-SLIDE, outer sill in the façade-stuck doors has been added;

24. MB-78EI technical window to the fire façade has been added;

25. MB-59S CASEMENT, revised two-coloured elements selection;?