PROGRAM:

1. Optimization calculations have been improved for profiles exceeding the standard bar length.

PROGRAM:

1. Corrected an error where negative prices were displayed when recalculating an offer.

WINDOW AND DOOR SYSTEMS:

1. MB-82 HS, changed the method of counting gasket  8G00150, 8G00153.

FACADE SYSTEMS:

1. MB-SR60N EFEKT, panel mounting plates added.

WINDOW HARDWARE:

1. MB-69V, Updated hardware.

DOOR HARDWARE:

1. Added comments about not using Fuhr and GU locks with day function for smoke and fire systems.

2. Correction of electrical equipment selection for Fuhr locks.

WINDOW AND DOOR SYSTEMS:

1.MB-69V, added new system.

2.MB-50V Slide, added new system.

3.MB-86N EI, added new system.

4.MB-79N;

-added frames with bottom rail for fixed window,

-added linear drainage,

-added connection of frames to selected extensions.

5.MB-86, added casements sashes for display windows.

6.MB-86N;

-added connection of frames to selected extensions,

-added panel door leaves and frames.

7.MB-86N Pivot Door;

-added panel door leaves,

-added changing direction strip as accesory for wala hinges.

8.MB-86US, added corner solid glass connection.

9.MB-SKYLINE;

-added corner solid connection,

-added corner solid glass connection,

-added compensating profile,

-added gasket and handles,

-added connection scheme.

10.MB-SKYLINE TYPE R, added active door leaf K519471X on the first rail.

11.MB-77HS, added corner profiles for connection with MB-79N, MB-86/N, MB-104 Passive.

12.MB-82HS, added door leaves with steel reinforcement.

FACADE SYSTEMS;

1.MB-SR50N IW, updated glazing table.

2.MB-MT50N, added top and bottom bracket.

OTHER SYSTEMS;

1.MB-OpenSky 140, added mounting consoles and joints.

THERMAL CALCULATIONS;

1.Completed Uf values for MB-86.

2.Completed Uf values for MB-86N.

3.Completed Uf values for MB-79N.

4.Completed Uf values for MB-82HS.

5.Added Uf values for MB-86N EI.

WINDOW HARDWARE;

1.Changed Aumüller locking drive for MB-86EI system.

2.Added Roto Solid B roller hinges.

DOOR HARDWARE;

1.Added Assa Abloy electric locks.

2.Added WALA handles with a magnetic signboard.

3.Corrected the selection of G-U MR2, Automatic A2, Automatic A3 locks.

4.Dodano zamek G-U SECURY ADR.

5.Withdrawn G-U Automatic A4 lock.

6.Added Aluprof Standard handles.

7.Added 3-point attachment to 8030144X pull handle.

SOFTWARE;

1.Added new design of the orders tab.

2.Corrected operation of the progress bar.

3.Added new macros for glazzing;

-$GLASS_RW0$ for the definition of RW parameters - without decimal places,

-$GLASS_SG0$ for the definition of g parameters expressed in % - without decimal places.

4.Added possibility to increase the construction price by %.

5.Added possibility to import simple elements.

6.A new look of the test version of the program has been added, available only in the local version of the program

AMENDMENTS;

1.MB-86N Pivot Door;

-added dimensioning of the hinge rotation axis,

-corrected the selection of glazing washers.

2.OKUCIA 2, corrected hinges selection of Simonswerk.

3.OKUCIA 1, corrected the selection of latchs for Roto AL i Roto AL Designo in MB-79N i MB79N US systems.

4.MB-OPENSKY 140, corrected the selection of drive lever.

5.MB-SR50N HI+, added facade frames for MB-79N.

6.MB-100GFT, corrected the selection of handles.

7.MB-86 FOLDLINE HD, added a new 7-3-4 scheme.

8.MB-60E EI;

-corrected the security pins selection,

-corrected the selection of handles Eco Schulte.

PRICE LIST;

1.Added colour RAL7038 to the standard list.

2.Added colour options for MB-86FoldLine/HD elements.

3.Blocked the FUHR 833, 833p, 835 locks with daily function in fire systems.

EMENDAMENTI;

1. MB-86N, correzione della lunghezza della soglia K528776X;

2. MB-Opensky140, migliore selezione di leva di azionamento e sensori per pergole a due campate;

3. Corrette le sezioni trasversali errate;

LISTINO PREZZI;

4. Il prezzo del pannello AD01 nel listino prezzi in PLN è stato corretto;

ALTRI SISTEMI;

1. MB-OpenSky 140;

-Aggiunto sviluppo laterale del pergolato;

- È stata aggiunta una nuova variante di drenaggio: Tipo B nascosto;

LISTINO PREZZI;

1. MB-OpenSky 140; Le lunghezze dei profili sono state integrate: K441197X, K441198X, K441031X, K440650X e assegnate al gruppo di sconto MBOPENSKY;

MODIFICHE;

1. MB-77HS, migliorata la verniciatura delle strisce di mascheratura esterne ed interne K432032X per la struttura a 3 binari;

2. MB-79N Casement, La disposizione dei profili a "Z" ed a "T" nella vetratzione è stata migliorata;

3. MB-82HS, Corretta la selezione degli isolanti termici sulla divisione e vetratura, selezionati per le varianti SI, SI+;

ALTRI SISTEMI;

1. MB-OpenSky 140, Aggiunto l'aggiornamento del sistema.

SISTEMI PER FINESTRE E PORTE:

1. MB-86N:

- L'inserto in EPS per i telai delle porte K528735X e K528736X e stato modificato;

- Aggiunto il drenaggio lineare;

- Aggiunti nuovi profili K440949X, K440950X e K528648X;

- Sono stati aggiunti nuovi telai e soglia con aletta di montaggio, telai con aletta interna, piastara di calcio per porta balcone e traverse rinforzate;

2. MB79N:

- Nuovi profili K520048X, K440949X, K440950X;

- Connettori aggiunti;

3. MB-HARMONY OFFICE, Aggiunti nuovi profili K441060X, K441061X, K415188X;

4. MB-SKYLINE TYPE-R:

- Aggiunti nuovi profili K530312X, K530314X, K530313X, nuovi accessori e connettori;

- Connettori;

- Aggiunta soluzione con profilo di compensazione;

- Corretta la selezione della ferramenta;

5. MB-79N US:

- Introduzione di ante vetrate dall'esterno;

- Aggiunta soluzione con montante mobile per ferramanet in alluminio e PVC;

- Aggiunta vetrazione per fascia da 30 mm;

- Completamento della serie di tipi per telai e traverse;

SISTEMI DI FACCIATA;

1. MB-SR50N, MB-SR50N HI, MB-SR50N HI+, MB-SR50N IW, Aggiunti elementi di drenaggio;

2. MB-SR50N EFEKT, Le fasce di vetratura sono state corrette.

MODIFICHE;

1. MB-77HS:

- Possibilita di selezionare GU Silent Close da GU Pas24 rimossa;

- Bicolore aggiunto per estensioni al drenaggio lineare;

2. MB-78EI:

- K518394X lunghezza del profilo corretta;

- Selezione errata degli inserti ignifugo 80462111 corretta;

3. MB-79N, Aggiunti inserti sigillanti di montante mobile per le ali UP;

4. MB-SKYLINE TYPE-R:

- Corretto il commentario relativo all'ala troppo larga;

- Corrette le quantita di selezione per i profili K440250 e K440251;

5. MB-SR50N EI, Le rondelle mancanti sotto la finestra MB-86 EI sono state integrate;

ISTINO PREZZI;

1. MB-86N Pivot Door, Aggiunti pannelli dedicati;

CALCOLI TERMICI;

1. MB-59HS, Elenco coefficienti Uf aggiornato.

SOFTWARE:

1. Fixed the function Define all hardware and handles;

2. Export of printouts to Excel restored;

3. Adding a button to reset the layout settings in the printout of the Material Order;

4. Fixed $COUNT$ macro;

5. Added ability to export comments and messages and warnings to financial and accounting programs.

AMENDMENTS:

1. MB-77HS:

- The quantity of cover K432034X for scheme G3 has been corrected;

- Cover K440230X length corrected;

2. MB-78EI,  Corrected selection of Eco Shulte 8000965X single-sided handle;

3. MB-SKYLINE TYPE-R, Added missing threshold reinforcement 8G00471X.

FACADE SYSTEMS:

1. MB-SE65, Added new system;

2. MB-MM50N:

- Added new strips;

- Added panel fixing profile as group of elements;

- Completing moments of inertia;

3. MB-MT50N, Added free filling;

4. MB-79N WW, Updated list of avaliable profiles.

WINDOW AND DOOR SYSTEMS:

1. MB-37 Slide Storm, Added new system;

2. MB-SKYLINE TYPE-R, Added static mullion K532277X and reinforcement;

3. MB-SKYLINE TYPE-R, Changed profile K440250X for K430869X and K440251X for K430868X;

4. MB-79N Casement, Removed central gasket choice;

5. MB-79N, Correcting window sill connector code;

6. MB-82HS, SI+ variant now is possible only for K530111X i K530112X wings. Corrected moment of inertia values for non-expansion profiles;

7. MB-86N Pivot Door, Added threshold tightening and optional threshold concealing gasket 8G00360X;

8. MB-86N Pivot Door, Added  Wala 500 kg hinges for display window constructions, changed the selection of electrical equipment for Fuhr locks;

9. MB-Slider Window, Added spacer 8A01028X, changed gasket 127253 for 8G00482X;

OTHER SYSTEMS:

1. MB-Open Slide, Added new accessories 8G00461X, 8G00462X, 8G00463X, 8G00464X, 8H01383X;

2. MB-Opensky 120:

- Added the possibility to select the direction of opening the lamelas;

- Added possibility of individual mullion drainage;

- Added a graphic water drainage diagrams for template constructions.

WINDOW HARDWARE:

1. Roto NX Alu, Added new hardware;

2. Master Star, Added new hardware;

3. MB-Slimline, Added dimensions for GEZE OL 90N opener assembly.

DOOR HARDWARE:

1. All systems, Added Wala pull handles with microswitch and EKEY finger scanner;

2. MB-104, Added Ecoschulte push bar;

3. MB-70, MB-79N, Corrected dimensions for Dormakaba TS Match door closer, changed selection of balcony door bolts.

SUPPLEMENTS:

1. MB-45, MB-70, MB-70 Casement, MB-79N, MB-79N Casement,  MB-86, MB-86 US, MB-86 Casement, MB-Ferroline, MB-Slimline, Added USA and Kanada supplement.

THERMAL CALCULATIONS:

1. MB-82HS, Completed Uf value factors;

2. MB-100 GFT, Completed Uf value factors;

3. MB-59HS, Completed Uf value factors;

4. Completed thermal calculations for adjustment profiles.

SOFTWARE:

1. Optimization of gaskets and accesories was modified in the Cut List- option available in program options;

2. Added a module to optimize the smallest waste for different bar lenghts.

PRICELIST:

1. Added new Decoral color Turner OAK;

2. Added matte finish colors for Dr.Hahn AT hinges;

3. Added R8019 color for GEZE 8H01314X door closer;

4. Corrected price of gaskets 120655 and 120656;

5.  MB-100GFT is now available in all markets;

6. Corrected availability of lengths and colors for selected profiles in MB-77HS system;

7. Removed choose of ROTO matte finish handles;

8. Changed length of K440571X profile in MB-OPEN SLIDE system;

9. A new availability policy for profiles, accessories and fittings has been introduced: 7 working days and availability determined on an individual basis;

10. Added black finish for inserts for corners (8A00292X, 80162105, 80162106, 80162107, 80162126, 80162136, 80162139, 80162148, 8A01111X);

11. Added black color for gasket 120514.

AMENDMENTS:

1. MB-79N:

- Removed connection of K520100X sash with K520060X crosspiece;

- Corrected K520140X leaf profile calculations used as frame;

- Corrected selection of acoustic gasket;

2. MB-79N Casement DPA:

- Corrected leaf overlap;

- Completed selection of  K41PL060 flat profile for door closer;

3. MB-86 Fold Line HD:

- Corrected amount of drainage cover;

- Added alternative choice of closure strip;

4. MB-Skyline Type-R:

- Added automatic selection of  roller clamp for leaf weight. Construction parameters choice is not available anymore;

- Corrected length of compensating profile;

- Corrected length of profile 009302;

5. MB-77 HS:

- Removed selection of ePower hardware for narrow mullion;

- Corrected selection of tightening insert for a corner;

6. MB-82 HS:

- Corrected length of cover 8G001370;

- Added message about lack of hardware for G3 scheme;

7. MB-86N Pivot Door, Corrected length of strip changing direction K528737X, threshold cover 8G00326X and  thermal insulator 120557;

8. MB-SLIDER WINDOW, Added cooperation with MB-45 reinforced profiles;

9. MB-DPA, Removed unnecessary clamping strips in facades;

10. MB-SR50N EI,Corrected amount of holding inserts screws, corrected selection of  window adapter;

11. MB-SR50N OW, corrected selection of fittings;

12. MB-SR50N OW HI+, Corrected invalid message of selection of fittings;

13. MB-SR50N EFEKT, Added Sika silicone for sections, corrected selection of panel filling spacers;

14. MB-SR50N HI+, Corrected selection of  window spacer gaskets;

15. MB-MT50N, Corrected amount of transom screws for 60-64mm range of glazing.

SOFTWARE:

1. Fixed an error appearing after entering more add-ons in the hardware window;

2. MB-CAD reports an error when account is not authorized to download updates;

PRICE LIST:

1. MB-86N PIVOT, the missing price for profiles K528737X, K528775X has been completed;

AMENDMENTS:

1. MB-60E EI, swelling strip calculation 120655 corrected;

2. MB-SR50N OW, hardware selection corrected;

3. The position of Wala WR1R hinges on the passive wing has been corrected;

WE REMIND YOU OF:

1. The connection of the MB-CAD program to the authorized zone has been implemented;

SOFTWARE:

1. The connection of the MB-CAD program to the authorized zone has been implemented;

2. The performance of the System Editor has been improved. Copied elements already have the data of the copied element;

OTHER SYSTEMS:

1. MB-79N DPA, removed the possibility of using bottom rail in sash variant II;

PRICE LIST:

1. MB-82HS, added short bar lengths;

AMENDMENTS:

1. MB-77HS:

- Changed minimum glazing range for frames to 13mm;

- Corrected the length of narrow mullion;

- Corrected bezel lengths K440230X and K432939X;

- Added handle height of 407.5mm for HAUTAU hardware by ranges;

- Added additional GU hardware for sashes in 3-rail frame when Ls>2199mm;

2. MB-82HS, improved sash profile length when narrow mullion;

3. MB-79N DPA, corrected sash overlap when automatic is used;

4. MB-79N WW, the list of profiles from the MB-79N system has been supplemented;

5. MB-SR50N EI, the selection of insulating plates and inserts has been corrected;

SISTEMI DI PORTE-FINESTRE:

1. MB-82HS, nuovo sistema introdotto;

2. MB-104 Passive, aggiunto alternativo angolo di serraggio 8A00797X;

3. MB-HARMONY OFFICE, ggiunte fasce di mascheratura del rivestimento, rimossi alcuni nastri tra i vetri;

4. MB-60E EI,  MB-86EI, MB-79N, MB-86N, MB-86, MB-70, MB-60, MB-59S,  MB-59SE, gamme di vetrate corrette;

SISTEMI DI FACCIATE:

1. MB-SR50N OW HI+, nuovo sistema introdotto;

2. MB-SR50N OW, corretta la selezione delle guarnizioni e delle distanze nelle tabelle dei vetri delle finestre;

3. MB-SR50N, MB-SR50N EFEKT, MB-SR50N HI,MB-SR50N HI+, MB-SR50N PL, aggiunto un nuovo montante per facciata K440749X da 45 mm;

4. MB-SR50N EI:

- profilo del nucleo dell'inserto refrigerante;

- spessore del pacchetto vetri aumentato a 72 mm;  

- inserti aggiunti a MB-SR50 EI - REI;

- corretto codice badge 8A01086X;

5. MB-SR50N, striscia K441059X aggiunta;

ALTRI SISTEMI:

1. MB-79N WW, nuovo sistema introdotto;

2. MB-OPENSKY 120, aggiunte varianti a parete;

FERRAMENTA:

1. Sobinco Chrono Standard, aggiunta nuova ferramenta per le finestre;  

2. Sobinco ChronoPlus InvisionPro, ritirata chiusura per balcone 18200825;

3. MB-86N Pivot Door, introdotte le cerniere Pivot Wala da 500 kg;

4. È stata aggiunta la possibilità di selezionare qualsiasi maniglia con qualsiasi serratura;

CALCOLI TERMICI:

1. Aggiornata la lista dei coefficienti Uf per MB-MM50N SI;

2. Aggiornata la lista dei coefficienti Uf per MB-82HS N;

3. Aggiornata la lista dei coefficienti Uf per MB-79N US;

LISTINO PREZZI:

1. Sono state modificate le lunghezze dei profili sottofinestra: 127008, 127009, 127010, 127011, 127074, 127075, 127076, 127077;

2. Aggiornate le lunghezze dei profili del sistema MB-OPENSKY: K440566X, K440565X;

3. Aggiunta lunghezza commerciale di 3400mm per il profilo K518880X;

4. MB-82HS, è stato creato un nuovo gruppo di sconti per i profili nel nuovo sistema - MB82HS;

PROGRAMMA:

1. Aggiunta la possibilità di inserire dichiarazioni di proprietà prestazionali da parte dei clienti - salvandole in un file separato;

2. MB-CAD, corretta l'impostazione predefinita del parametro statico Cpe10 in Cpe1;

MODIFICHE: 

1. MB-100GFT, aggiunte maniglie come materiale dei raccordi;

2. MB-77HS, aggiunto binario 004115 al telaio K530075X;

3. MB-86 FoldLine HD, la larghezza delle ali nei modelli è stata corretta;

4. MB-60E EI, è stata integrata la scelta delle cerniere;

5. MB-79N US, corrected the facing of the crossbar to the concealed sash;

6. MB-79N US, corrected the ability to crimp the K520320X sash;