Automation

Amy 1 io with frame

• motor for Ø70 and Ø78 roller tubes
• mechanical limit switches

• motor for Ø70 and Ø78 roller tubes
• mechanical limit switches

• motor for Ø70 and Ø78 roller tubes
• mechanical limit switches
• emergency manual override

• motor for Ø70 and Ø78 roller tubes
• mechanical limit switches
• emergency manual override

• motor for Ø70 and Ø78 roller tubes
• mechanical limit switches
• emergency manual override

Blebox receiver for SB350

• radio receiver
• compatible with radio sensors: wind, sun-wind or shock sensors
• possibility to connect the monostable button switch
• operating temperature range -10..+70

• radio receiver
• compatible with wind sensor, wind radio sensor, wind-sun radio sensor, or shock sensor
• possibility to connect the up/down button switch
• operating temperature range -10..+55

• weather sensor for Touch BuCo
• includes: 3 sun sensors, wind sensor, temperature sensor, heated rain sensor

Sun-wind weather sensor via radio

Wind weather sensor via radio

wind-sun sensor

Wind&shock sensor via radio

Shock sensor

• wind and sun radio sensor
• integrated solar cells
• manual operation of the receivers using remote control/wall-mounted transmitters

Remote control receiver

Remote control receiver

• electronic limit switches
• silent brake
• possibility to set the limit switches using setup cable

• electronic limit switches
• built-in radio receiver
• silent brake
• possibility to set the limit switches using setup cable or remote control

• mechanical limit switches
• silent brake

• 1-channel remote control
• used as an individual, group or central transmitter
• uni- or bidirectional
• manual/automatic switching
• colour: white
• frequency 868 MHz

• 1-channel wall transmitter
• bidirectional
• frequency 868 MHz
• LED diode to display system status

• 1-channel remote control
• used as an individual, group or central transmitter
• uni- or bidirectional
• colour: white
• frequency 868 MHz

• the commands and the position are shown on the multi-line display
• 5 individual channels, 5 group channels and one central channel
• bidirectional only
• colour: white
• frequency 868 MHz

• electric linear actuator designed to set the tilt angle of the blades
• powered by AC 230V/50Hz
• tensile and compressive force – 1200N
• protection class IP65, possible stroke 0-200mm
• mechanical limit switches

• 5 individual channels and 1 central channel
• bidirectional
• frequency 868 MHz
• manual/automatic mode switching
• LED diode to display system status

• weather sensor with light, twilight and wind function
• swivelling wall bracket or pole mounting possible
• 230 V/50 Hz power supply necessary
• only in conjunction with compatible radio receivers from the elero radio system
• manual operation of the system via hand-held/wall-mounted transmitters

• weather sensor with light, twilight and wind function
• with additional rain sensor
• swivelling wall bracket or pole mounting possible
• 230 V/50 Hz power supply necessary
• only in conjunction with compatible radio receivers from the elero radio system
• manual operation of the system via hand-held/wall-mounted transmitters

• electronic limit switches
• built-in radio receiver
• overload protection
• possibility to set the limit switches using setup cable or remote control

• electronic limit switches
• built-in radio receiver
• possibility to set the limit switches using setup cable or remote control

• electronic limit switches
• built-in radio receiver
• overload protection
• possiblity to set the limit switches using setup cable or remote control

• electronic limit switches
• possibility to set the limit switches using setup cable

• electronic limit switches
• possibility to set the limit switches using setup cable or remote control

• electronic limit switches
• overload protection
• possibility to set the limit switches using setup cable

• 10+1-channel hand-held radio transmitter
• uni- and bidirectionally usable
• integrated timer (bidirectional per channel)
• Astro and holiday program
• visualisation of the transmission and feedback commands
• 10 single channels, 2 group channels and 1 central channel
• colour: white
• frequency 868 MHz

• mechanical limit switches

• mechanical limit switches

• mechanical limit switches

• single-channel hand-held transmitter with slider
• incl. wall bracket for optional wall mounting
• ProLine 2 radio system - reliable feedback and genuine routing function

• 5+1-channel hand-held radio transmitter
• uni- and bidirectional
• 5 individual channels, 1 central channel
• colour: white
• frequency 868 MHz

Flush mounting box for Touch Buco

mechanical limit switches

• IB+ amplifier
• required when the number of controllers is greater than 100

Controller IOALL868 for a pergola with a 24V linear motor and LED controller, compatible with Somfy IO remotes and the RAIN105HK rain and temperature sensor.

**Venetian

• inserted into the MoCo casing, to control drives connected to MoCo

LED RECEIVER io W POWERED 100W

For LED lighting in Corsica Awning (optional)

Group control box for 4 drives

• for individual control of 4 drives 230 V AC via IB+ or local switches
• local assignment of My position possible
• LED indicators for signaling controller settings
• possibility to connect wireless radio control

• motor for Ø70 and Ø78 roller tubes
• built-in control unit
• electronic limit switches
• electronically controlled motor rotation

• motor for Ø70 and Ø78 roller tubes
• built-in control unit
• electronic limit switches
• electronically controlled motor rotation

• motor for Ø70 and Ø78 roller tubes
• electronic limit switches
• electronically controlled motor rotation

• motor for Ø70 and Ø78 roller tubes
• built-in control unit
• electronic limit switches
• electronically controlled motor rotation

• motor for Ø70 and Ø78 roller tubes
• built-in control unit
• electronic limit switches
• electronically controlled motor rotation

• motor for Ø70 and Ø78 roller tubes

• motor for Ø70 and Ø78 roller tubes
• built-in control unit
• electronic limit switches
• electronically controlled motor rotation
• emergency manual override

• motor for Ø70 and Ø78 roller tubes

• motor for Ø70 and Ø78 roller tubes
• electronic limit switches
• electronically controlled motor rotation

• electronic limit switches

15-channel remote control

1-channel remote control RED

15-channel remote control

1-channel remote control

1-channel remote control with sun sensor switch

7-channel remote control with sun sensor switch

control extension for two motors

RATIO-H RED motor, DM45RM 1W for awnings (without cassette), one-way radio communication, mechanical end limits, Hand Crank

Wind-shock sensor via radio RED

JA Soft DC drive

• electric linear motor designed to set the tilt angle of the blades
• powered by AC230V/50Hz
• thrust – 450N
• power input 35W
• protection class IP55
• possible stroke 0-200mm
• working temperature -10°C to 40°C

LINEAR ROD ACTUATOR

• electronic limit switches
• built-in control unit
• overload protection
• possibility to set the limit switches using setup cable or remote control

• electronic limit switches
• built-in control unit
• possibility to set the limit switches using setup cable or remote control

• electronic limit switches
• overload protection
• possibility to set the limit switches using setup cable

• It works in the sun control system to ensure comfortable individual, small group and central control
• Central control via push button, solar automation or timer automation device

shake sensor IO

• 230V
• 5m black cable

Wind sensor IO homecontrol

IO receiver for Venetian blinds

• electronic limit switches
• built-in io control unit
• detection of obstacles and icing for upward movement
• possibility to set the limit switches with setup cable, remote control or Set & Go io

• electronic limit switches
• possibility to set the limit switches using setup cable

• electronic limit switches
• detection of obstacles and icing for upward movement
• possibility to set the limit switches using setup cable

• mechanical limit switches

• mechanical limit switches

• mechanical limit switches

• mechanical limit switches

• electronic limit switches
• obstacles detection
• overload protection
• possibility to set the limit switches using setup cable

• electronic limit switches
• built-in io control unit
• obstacles detection
• overload protection
• possibility to set the limit switches using setup cable, remote control or Set & Go io

• IO signal
• group and individual control
• battery and docking station included

• IO signal
• individual and group control
• time automation
• battery and docking station included

• 230V
• Hirschmann plug and socket required

• 230V
• Hirschmann plug and socket required

receiver IO for refleksols

• power supply: 230 V
• compatible with Soliris Sensor RTS+ rain option
• control through Soliris IB or Soliris Uno

to be controlled with Louver io radio receiver for pergola

control unit for LED strips in Corsica awning or Pergola

• three commands: to lift or lower the cover, press the button in the selected direction or stop

• with surface mounted box
• three commands: to lift or lower the cover, press the button in the selected direction or stop

1-channel IO remote control

1-channel remote control

1-channel io remote control

1-channel remote control for Venetian blinds

4-channel io remote control + common channel

4-channel remote control + common channel

4-channel remote control + common channel with solar automation

4-channel remote control io + common channel

4-channel remote control + common channel

1-channel remote control for blinds with solar automation support

• IB group control
• control via touch panel

• 4-channel radio wall transmitter
• frame included
• power supply: battery included
• output signals: radio signal without feedback
• control via touch panel

• radio wall transmitter
• frame included
• power supply: battery included
• output signals: radio signal without feedback
• control via touch panel

• 230V
• programmable individual "my" position
• automatic/manual mode changeover with status indicator
• possibility of central operation via IB+ Bus
• possibility to connect relay set that controls several devices (e.g. operation of 2 motors)
• control via touch panel

Switch

Switch

• power supply 230V
• black cable 5m
• feedback signal

• power supply: 230V~
• output signals: motor 230V~
• wind and sun sensor
• for Soliris Smoove IB+ and UNO

• IB group control
• automatic or manual drive control
• control according to sun protection and sunset setting
• Soliris Smoove IB+ can control up to 100 IB+ devices
• available control adapted to weather conditions (wind, rain, sun) - after the use of appropriate sensors

• pre-programmed week
• three operating modes: manual, automatic, presence simulation
• automatic change from summer to winter time and vice versa
• "my" position
• the ability to define a personalized schedule (4 commands/day)
• opening/closing the cover according to sunrise and sunset (function implemented through settings in the device or via a radio sensor)
• compatible with Sunis WireFree io wireless sun sensor

• mechanical limit switches
• quiet operation

• electronic limit switches
• built-in radio receiver
• possibility to set the limit switches using setup cable or remote control
• quiet operation

• electronic limit switches
• built-in io receiver
• possibility to set the end limit switches using setup cable, remote control or Set & Go io

• electronic limit switches
• built-in io receiver
• possibility to set the end limit switches using setup cable, remote control or Set & Go io

• electronic limit switches
• built-in io receiver
• possibility to set the end limit switches using setup cable, remote control or Set & Go io

• battery included
• feedback signal
• sensor for Tahoma Switch

Control through a mobile application via smartphone or tablet

Pergola Tilt 24 V io is a strong and compact linear drive designed to control the angle of inclination of the roof blades in bioclimatic pergolas

• 8 zone building control panel with touch screen
• driver of eight IB groups
• weather sensor input
• USB/RS485 interface input
• central switch
• built-in timer

for programming or setting the limit switches of drives

receiver for controlling LED lighting in Corsica awning or Pergola

• electronic limit switches
• built-in control unit
• obstacles detection
• overload protection
• possibility to set the end limit switches using setuo cable or remote control

• electronic limit switches
• built-in control unit
• obstacles detection
• overload protection
• possibility to set the end limit switches using setup cable or remote control

• mechanical limit switches

• electronic limit switches
• overload protection
• possibility to set the end limit switches using setup cable or remote control

• mechanical limit switches

• mechanical limit switches

• electronic limit switches
• built-in control unit
• possibility to set the end limit switches using setup cable or remote control

Control unit POWER ONE for LED tape or heater

LED MiLighting remote controller for pergolas

Surface mounting box for Touch Buco.

VariEco M12 DC drive

Power supply animeo REG 24VDC 1,5A

Power supply RED for LED 12V with radio receiver

• motor for Ø70 and Ø78 roller tubes
• mechanical limit switches
• emergency manual override

• electronic limit switches
• detection of obstacles and icing for upward movement
• possibility to set the limit switches using setup cable

Wind-shock sensor via radio

• motor for Ø70 and Ø78 roller tubes
• built-in control unit
• electronic limit switches
• emergency manual override

NICE 1-channel remote control

DOMI transmitter

• electronic limit switches
• built-in control unit
• possibility to set the limit switches using setup cable or remote control

• electronic limit switches
• built-in control unit
• possibility to set the limit switches using setup cable or remote control

• possibility of remote control by radio
• central control can be switched on or off with a slide switch
• possibility to program up to three sensors:  wind-sun automation possible

Wind-shock sensor via radio

Eolis wind sensor RTS

Control unit Pergola io Louver

Soliris Mod/Var radio receiver for controlling the blinds drive using the Situo Var RTS radio remote control (with scroll)

receiver RTS for Refleksol

• for IO devices
• USB connection to the computer

• power supply 230V~
• mechanical limit switches
• rdynamic (during movement) and static (after stopping) tension adjustment

• radio wall transmitter
• without frame
• power supply: battery included
• output signals: radio signal without feedback
• control via touch panel

• radio wall transmitter
• without frame
• power supply: battery included
• output signals: radio signal without feedback
• control via touch panel
• works with solar automation

• radio wall transmitter
• without frame
• power supply: battery included
• output signals: radio signal without feedback
• control via touch panel

• 2-channel radio wall transmitter
• frame included
• power supply: battery included
• output signals: radio signal without feedback
• control via touch panel

• power supply 230V
• wall transmitter
• without frame
• control via touch panel
• works with solar automation

wind-sun sensor via radio

sun-wind sensor via radio + option to connect the rain sensor

autonomous sun sensor

16-channel remote control

• battery included
• feedback signal
• sensor for Tahoma Switch

• surface-mounted, IP 44
• power supply: 230V~
• output signals: silnik 230V~