MB-104 PASSIVE Window & door system that provides the highest thermal insulation performance
UW sub> from 0,53 W/(m2K)Thermal insulation for the window being opened
class C5/B5 PN-EN 12210:2001Wind tightness
class AE 1800 PN-EN 12208:2001Watertightness
class 4 PN-EN 12207:2001Air tightness window
The MB-104 Passive is a thermal break-equipped window & door system that provides the highest thermal insulation performance, and meets all the requirements for passive building components.
The system is used to fabricate exterior architectural development elements, e.g. various types of windows, doors, vestibules, and spatial structures, which are characterized, in addition to the excellent thermal insulation, by a very good sound insulation, water- and air tightness and high structural strength.
The MB-104 Passive system's profile construction comes in two variants, depending on the requirements for thermal energy savings: SI and AERO
The MB-104 Passive -based door & window parameters exceed the current requirements of the strictest applicable regulations and standards – that’s why the MB-104 Passive system is dedicated to energy-efficient and passive building.
Why MB-104 Passive?
- Passive House Institute Darmstadt-certified windows: MB-104 Passive SI and MB-104 Passive Aero
- excellent thermal insulation performance for openable window: UW from 0,53 W/(m2K) and for door UD from 0,62 W/(m2K)
- standard-exceeding tightness and insulation performance
- large range of glazing, up to 81mm
- exterior doors are available both glazed and panelled – it’s a perfect entrance door to a modern home
MB-104 Passive can also be used to fabricate highly aesthetic panel doors that meet the expectations of the most demanding users.
Aero Certificate PHI Darmstadt MB-104 PASSIVE SI - window
Brochure MB-104 PASSIVE
Certificate PHI Darmstadt MB-104 PASSIVE Aero - window
Aero Certificate PHI Darmstadt MB-104 PASSIVE SI - door